Hifiverse

Phonovorstufen - MoFi Electronics MASTERPHONO

Beschreibung, Bilder, technische Daten und Spezifikationen

MoFi Electronics MASTERPHONO
Bildquelle - (c) MoFi Electronics

The MasterPhono is an all-analogue phono preamplifier from MoFi Electronics, the hardware division of Mobile Fidelity Sound Lab. MoFi developed it with audio engineer Peter Madnick over more than a year of research, development and prototyping, and it is designed and built in America. Its central feature is a current-mode (transimpedance) input stage for moving-coil cartridges, next to two conventional voltage inputs. List price is USD 5,995 in Walnut or Black.

Key specs that matter

Gain is 40 or 50 dB for MM and 60 or 70 dB for MC. Voltage-input loading is 15, 30, 50, 75, 100, 500, 1k, 10k and 47k ohms (+150 pF), plus a Custom position. THD is 0.005% A-weighted for MM (10 mV, 1 kHz) and 0.010% to 0.013% A-weighted for MC (1 mV, 1 kHz). Frequency response is 10 Hz - 50 kHz (±0.20 dB, filter off), and RIAA accuracy is ±0.05 dB. Maximum output is 10 V RMS at 1% THD. Output impedance is 230 ohms balanced and 115 ohms unbalanced. The main chassis measures 432 x 89 x 400 mm (W x H x D), and weight is 6.8 kg. Mains input is 100 - 260 V AC with auto switching, and MoFi gives a five-year parts and labour warranty.

Engineering and use context

Input 1 is the current input, with RCA and XLR connectors and trans-impedance dynamic loading. Instead of a fixed load resistance it presents a near-zero impedance to the cartridge and avoids high-voltage gain at the input stage. On this input the Ohms selector is switched off. Inputs 2 and 3 are voltage inputs for MC, MI and MM cartridges, and optional custom load resistors plug into the Load RCA jacks on the rear panel.

Circuitry is fully discrete from input to output. From the high-pass filter to the output jacks it is fully balanced, DC-coupled and servo-controlled, and critical components sit inside a shielded, thermally stable enclosure. RIAA equalisation is passive, using NOS polystyrene and polypropylene film/foil capacitors, with critical resistors at 0.1% or 0.5% tolerance. A dual-chassis construction isolates the power supply from the audio circuits, regulation is cascaded over several stages, and an isolated signal grounding post is provided.

Mono, filter, loading and gain settings are stored for each input. Input, gain, mute, mono, meter and the subsonic filter are remote controlled. Dual meters are used for output monitoring and for calibration of cartridge azimuth. A USB input accepts software updates.

Pairing

A preamplifier or integrated amplifier with a line input is required. Low-impedance MC cartridges connect to the current input. MoFi recommends the XLR outputs into balanced line inputs.

Alternatives

The UltraPhono Pro is MoFi Electronics' single-input phono stage based on the core architecture of the MasterPhono.

Spezifikationen

  • Modellbezeichnung

    MASTERPHONO

  • Eingänge (symmetrisch)

    2

  • Eingänge (unsymmetrisch)

    2

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    15, 30, 50, 75, 100, 500, 1000, 10 000, 47 000

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    selectable gain for MM or MC 40db, 50db, 60db, 70db

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Klirrfaktor + Rauschen (%)

    0.005

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    6.8

  • Offizieller Link