Hifiverse

Phonovorstufen - Mola Mola Lupe

Beschreibung, Bilder, technische Daten und Spezifikationen

Mola Mola Lupe
Bildquelle - (c) Mola Mola

The Lupe is the standalone phono stage from the Dutch manufacturer Mola Mola. It began as a simple RIAA add-on for the Makua preamplifier, a board that is also available in the Kula integrated amplifier, and Mola Mola calls the standalone version its archival grade phono stage. Lupe uses the half-size chassis of the range, has its own dedicated power supply and adds a subsonic filter, and its display shows the current settings at a glance.

Key specs that matter

Inputs are three single-ended and one balanced, and outputs are one balanced and one single-ended. Input noise is 0.35 nV/rtHz (MC) and 0.9 pA/rtHz (MM). Sensitivity is variable from 30 µV to 5 mV. THD and IMD are given as not measurable. RIAA conformance is ±0.1 dB, and the subsonic filter is -3 dB at 20 Hz. Resistive loads are 18, 30, 47, 75 and 120 kohms for MM and 60, 100, 150, 250, 400 and 650 ohms and 1 kohm for MC. Capacitive loads for MM are 0, 50, 100, 150, 220, 270, 330 and 380 pF. Gain is 45 or 50 dB for MM and 52 - 87 dB in 5 dB steps for MC. Equalisation time constants are t1 200, 250, 318, 400 or 450 µs and t2 50, 64, 75 or 100 µs, with a bass shelf of 14, 18 or 20 dB.

Engineering and use context

Unlike the more common arrangement of an MC head amp ahead of an MM stage, the MC and MM input stages of the Lupe are fully independent. Each has an equally short signal path, and the two are optimised for current noise and voltage noise respectively. Input gain is switchable in 5 dB steps over a 40 dB range, and input resistance and capacitance are switched individually. According to Mola Mola, the available EQ settings cover practically all known cutting curves, including 78 rpm.

All settings are software-controlled, either on the fly from a smartphone or tablet through the Mola Mola Remote app or stored under the preset buttons. Control is digital, but all switching is done in the analogue domain. Any of the four inputs can be routed through the phono stage.

Pairing

A preamplifier or integrated amplifier with a balanced XLR or single-ended RCA line input is required. Several turntables or cartridges can stay connected at the same time across the four inputs. The matching Mola Mola preamplifier is the Makua, and the matching power amplifier is the Perca.

Alternatives

The phono board inside the Makua preamplifier and the Kula integrated amplifier is the other Mola Mola phono option.

Spezifikationen

  • Modellbezeichnung

    Lupe

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    N/A

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    50 (MM), 87 (MC)

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link