Hifiverse

Phonovorstufen - Lamm Industries LP1 Signature Phono

Beschreibung, Bilder, technische Daten und Spezifikationen

Lamm Industries LP1 Signature Phono
Bildquelle - (c) Lamm Industries

The LP1 Signature is a dual-mono tube phono stage designed by Vladimir Lamm and made by Lamm Industries in Brooklyn, New York. It completes the Signature Series together with the ML3 Signature power amplifier and the LL1 Signature line preamplifier. The set has three chassis - the audio unit and a separate power supply for each channel.

Key specs that matter

Inputs are two for moving-coil cartridges and one for moving-magnet. Input impedance is 31.5 ohms on MC1, 430 ohms on MC2 and 47 kohms on the MM input. Gain is 71 dB on the low-impedance MC input and 59.7 dB on the second MC input. Frequency response is 20 Hz - 20 kHz. Its audio circuit operates in pure class A without loop feedback and uses two 6C3P and two 6C45P-E tubes, and each power supply has five more tubes.

Engineering and use context

Both channels sit in one audio chassis as separate, identical circuits, each based on two high-transconductance triodes. Plate current is 55 mA per channel, against a few milliamps in typical tube phono stages, and new-generation tubes allow this current. For moving-coil cartridges, step-up transformers provide part of the gain, and the circuit uses few active stages.

Lamm derived the power supplies from the supply of its L2 preamplifier. Two of them do not fit into one chassis. Each supply uses full-wave vacuum tube rectification, a choke-input filter, vacuum tube high-voltage regulation and solid-state analogue non-switching regulators for the heaters. Custom low-noise transformers are used, and energy storage exceeds 100 joules. Supply tubes are 12AX3 or 12BE3 rectifiers, 6C19P regulators, 6AK5 and 5651A.

Pairing

Two MC inputs with different input impedances allow two moving-coil cartridges, or one MC and one MM cartridge, to stay connected at the same time. A preamplifier with a line-level input is required. The matching Lamm line stages are the LL1.1 Signature and the L2.1 Reference.

Alternatives

The Lamm Industries LP2.1 is the other tube phono stage in the Lamm range.

Spezifikationen

  • Modellbezeichnung

    LP1 Signature Phono

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    1 MM + 2 MC

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    31.5 (MC1) + 430 (MC2) + 47 000 (MM)

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    N/A

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Klirrfaktor + Rauschen (%)

    N/A

  • Abmessungen (mm)

    114 x 482 x 352

  • Gewicht (kg)

    16.7

  • Offizieller Link