Huei is a moving magnet and moving coil phono stage from Chord Electronics, developed and manufactured in Kent, England, and part of the company's Qutest range. It was announced internationally in May 2019 and reached UK buyers in November of that year at GBP 990. According to Chord, it is the first Chord phono preamp with microprocessor control of its main features.
Key specs that matter
Input impedance is 47,000 ohms for MM and 100 - 3,700 ohms for MC, 12-step user selectable. The MC steps are 100, 150, 320, 470, 1,000 and 3,700 ohms, each also available with an added 2.2 µF load. Gain has eight steps per mode - MM 21 - 42 dB (RCA) and 27 - 48 dB (XLR), MC 49 - 70 dB (RCA) and 55 - 76 dB (XLR). Input noise is 1.1 nV/√Hz. Equalisation is the RIAA curve with ±0.1 dB accuracy, and frequency response is 12 Hz - 25 kHz. Maximum output voltage is 20 V RMS, and output impedance is 520 ohms (resistive). There is one stereo unbalanced RCA input, one stereo unbalanced RCA output and one stereo balanced XLR output. Dimensions are 45 x 160 x 88 mm (H x W x D), and weight is 657 g.
Engineering and use context
Inside, the circuitry is fully balanced. Chord recommends using one output at a time and notes that XLR may be preferable. Selecting an MC load with 2.2 µF dampens the ringing of lower-impedance cartridges and reduces distortion, according to the manual. Impedance cannot be changed in MM mode. Three front buttons set MM or MC, gain and impedance, and illuminated polychromatic control spheres show each setting, also giving access to the rumble filter. Sphere brightness has high and low modes. Its rumble filter uses a Rauch slope of -24 dB per octave below 50 Hz. Through a top-mounted viewing window the illuminated electronics are visible. The casework is precision-machined from solid aircraft-grade aluminium billet in a form factor similar to the Qutest DAC. Above the RCA inputs sits a grounding post, and a gold-plated grounding plate is preinstalled for tonearms that do not provide a ground for both RCA connectors. Power comes from the supplied 12 V, 2 A external supply, with a power switch above the 12 V DC input. A memory function keeps the settings when the unit is switched off.
Pairing
A preamplifier or integrated amplifier that can attenuate the output is required, and a direct connection to a power amplifier is not permitted. The single RCA input accepts one turntable. For a turntable with balanced connections the grounding plate is removed.
Alternatives
The Symphonic is Chord's dedicated moving coil phono stage with fully balanced circuitry.