Hifiverse

Phonovorstufen - Keces Audio Ephono+

Beschreibung, Bilder, technische Daten und Spezifikationen

Keces Audio Ephono+
Bildquelle - (c) Keces Audio

The Ephono+ is the Ephono phono preamplifier from Keces Audio of Taiwan combined with its outboard Ephono Power supply, sold by Keces as Ephono + Ephono Power. It is a two-box design with switchable gain for moving magnet and moving coil cartridges and both balanced and unbalanced outputs. Keces now lists this pairing among its discontinued products.

Key specs that matter

Gain is 40, 46 or 52 dB for MM and 60, 66 or 72 dB for MC. Input impedance is 47 kohm for MM, and MC impedance is adjustable to 56, 100 or 220 ohms. Input capacitance is 100 pF. Frequency response is 20 Hz - 20 kHz, and RIAA accuracy is within 0.2 dB. THD is below 0.004% for MM and below 0.03% for MC. Signal-to-noise ratio is 86 dB for MM and 78 dB for MC, both A-weighted. Both chassis measure 220 x 220 x 66 mm (W x D x H). The Ephono weighs 2 kg and the Ephono Power 3 kg.

Engineering and use context

Ephono Power is a linear power supply. It delivers 24 V DC at 2 A to the Ephono through its DC input, and its AC input is switchable between 110 - 120 V, 60 Hz and 220 - 240 V, 50 Hz. Power consumption of the supply is 60 W. Over Temperature Protection (OTP) is built into the Ephono Power.

Both boxes use aluminium casings. The Ephono casing is 4 mm aluminium and the Ephono Power casing is 3 mm aluminium, and Keces specifies the aluminium chassis for blocking EMI and RFI interference.

Keces Audio is a brand of Huikang Electronic Co., Ltd., based in New Taipei City.

Pairing

A preamplifier or integrated amplifier with a line-level input is required, balanced XLR or unbalanced RCA. The MC gain and impedance settings allow low-output MC cartridges without a step-up transformer.

Alternatives

The newer Ephono+ with Ephono+ Power is the current Keces phono preamplifier, with a further input for DS Audio optical cartridges and a subsonic filter.

Spezifikationen

  • Modellbezeichnung

    Ephono+

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    2

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    MM 47 000, MC variable 56/100/22

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    40dB/46dB/52dB for MM, 60dB/66dB/72dB for MC

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Klirrfaktor + Rauschen (%)

    MM <0.004%, MC <0.03%

  • Abmessungen (mm)

    220 x 220 x 66 (Main) + 220 x 220 x 66 (PSU)

  • Gewicht (kg)

    2 (Main) + 3 (PSU)

  • Offizieller Link