Hifiverse

Phonovorstufen - Electrocompaniet ECP 2 MKII

Beschreibung, Bilder, technische Daten und Spezifikationen

Electrocompaniet ECP 2 MKII
Bildquelle - (c) Electrocompaniet

The ECP 2 MKII is a balanced phono stage from Electrocompaniet, designed and manufactured in Tau, Norway. This MKII version introduces a new chassis and front plate design in line with the other Electrocompaniet products. High- and low-output moving coil (MC), moving magnet (MM), moving micro cross (MMC) and moving iron (MI) cartridges are all supported, and every adjustment is made on DIP switch arrays on the rear panel.

Key specs that matter

Gain at 1 kHz is adjustable from 39.8 to 71.4 dB at the RCA output and from 45.8 to 76.4 dB at the XLR output. Resistance loading is adjustable from 10 ohms to 47 kohms, capacitive loading from 0 to 350 pF. Maximum output level is 17.5 V rms (+25 dBV), with an overload margin above 31 dB at 1 kHz. Output impedance is 100 ohms single-ended and 200 ohms balanced. Frequency response is 20 Hz - 20 kHz (±0.2 dB) and RIAA correction accuracy is ±0.1 dB. A subsonic filter is set at 11 Hz (-3 dB) with a 24 dB/octave slope. Channel separation is better than 85 dB (20 Hz - 20 kHz), THD+N is below 0.003% at 1 kHz, and S/N is 91 dB (1 kHz, A-weighted, ref. 5 mV input) or 67.4 dB (ref. 500 µV input). Dimensions are 470 x 373 x 78 mm (W x D x H), and weight is 9 kg.

Engineering and use context

Inside, Electrocompaniet uses instrumentation and operational amplifiers together with discrete components in the signal path, and the circuit is DC coupled throughout. Each channel has its own array of 12 DIP switches. Switches 10 - 12 set the gain in eight steps (+20 dB, -10 dB and -5 dB sections), and the XLR output adds 6 dB to each setting. Switches 4 - 9 combine fixed resistors of 47, 100, 220, 470 and 2700 ohms into the resistance settings, with 47 kohms as standard and an optional 2.5 kohm load on the MM input for high-output MC and MMC cartridges. Capacitance is added by switches 1 - 3 in 50 pF steps.

Connections are one single-ended RCA input with a ground screw, RCA line outputs and XLR balanced outputs wired with ground on pin 1, + on pin 2 and - on pin 3. The front panel carries only a power button and a blue E power indicator. An AC mains cord, a spare mains fuse, an inspection card and the owner's manual are included.

Pairing

A line stage, preamplifier or integrated amplifier is required, and the fixed output must not be connected directly to a power amplifier. The XLR output requires a balanced input. A turntable ground wire connects to the GND screw.

Alternatives

Electrocompaniet makes no other phono stage in its current range, so the ECP 2 MKII has no sibling in its category.

Spezifikationen

  • Modellbezeichnung

    ECP 2 MKII

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    1

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    100 single-ended, 200 balanced

  • Verstärkung (dB)

    39,8 – 71,4 (RCA) + 45,8 – 76,4 (XLR)

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Klirrfaktor + Rauschen (%)

    < 0.003

  • Abmessungen (mm)

    470 × 373 × 78

  • Gewicht (kg)

    9

  • Offizieller Link