The E-Glo Petit 2 is a hybrid phono preamplifier from European Audio Team (E.A.T.), based in Lucenec in the Slovak Republic. E.A.T. describes it as a high-end hybrid phono preamp in a small and compact form factor. It accepts MM and MC cartridges, is handmade in Europe and is available in silver or black.
Key specs that matter
Gain is switchable to 40, 45, 50, 60, 65 or 70 dB. Input impedance is 10, 18, 43, 75, 150, 300, 600 or 1200 ohms in the low range and 30, 36, 42, 47, 53, 59, 65 or 75 kohms in the high range. Load capacitance is 50, 150, 270, 370, 520 or 620 pF. RIAA accuracy is within 0.1 dB (20 Hz - 20 kHz). Noise floor is 87 dB A-weighted and 70 dB unweighted (20 Hz - 20 kHz). THD is 0.15% (5 mV, 1 kHz, 45 dB gain). Output impedance is 100 ohms. There is one pair of RCA inputs and one pair of RCA line outputs. Dimensions are 226 x 78 x 262 mm (W x H x D).
Engineering and use context
This is a hybrid tube design with 12AX7 tubes. Its circuitry is fully discrete, with no op-amps. Its subsonic filter is switchable and works at 20 Hz, 18 dB/octave.
On the top panel are the power switch, the subsonic switch and push buttons for gain and capacitance. Input impedance is set with an Ω/kΩ selector and rotary controllers, and the selected values are shown on the front panel. Capacitance applies to MM cartridges and impedance to MC cartridges. An earth screw terminal sits next to the inputs. Power comes from an outboard 18 V/1000 mA DC supply, and in standby the unit draws less than 0.5 W.
Pairing
The output connects to a line input of an amplifier, not to a phono input. MC cartridges are connected directly, without a step-up transformer. The tonearm ground wire goes to the earth terminal.
Alternatives
The EAT E-Glo 2 is another phono stage from the same maker, with separate MM and MC gain settings.