Hifiverse

Phonovorstufen - Nagra Compact Phono

Beschreibung, Bilder, technische Daten und Spezifikationen

Nagra Compact Phono
Bildquelle - (c) Nagra

Nagra's Compact Phono is a phono stage designed exclusively for moving-coil cartridges. It comes from the Swiss company founded in 1951 and run today as Audio Technology Switzerland SA, and it sits in the Compact range in the same chassis as the Nagra Streamer. Nagra's phono line started with the PL-P, its first hi-fi product, whose phono section was inspired by the microphone preamplifier of the Nagra IV-S reel-to-reel recorder. The VPS, BPS, Classic PHONO and HD PHONO followed, all centred on a Nagra-made step-up transformer. US price at launch was USD 4,950.

Key specs that matter

Input stage is a hand-wound Nagra transformer with 10 dB of gain. Overall gain is switchable between 47.5 dB (LOW) and 62 dB (HIGH). Frequency response is 20 Hz - 50 kHz (±1 dB within the RIAA curve). Signal-to-noise ratio is above 80 dB at 100 Hz in LOW and above 72 dB in HIGH, and crosstalk exceeds 85 dB and 73 dB respectively. THD+N is below 0.1% at 1 kHz on a laboratory power supply. Output impedance is below 10 ohms in LOW and below 25 ohms in HIGH. Connections are RCA inputs and outputs plus a ground terminal. Powering is 12 V DC from an external supply, consumption is 0.5 W, and the unit measures 185 x 166 x 41 mm and weighs 1.9 kg.

Engineering and use context

This 10 dB step-up transformer is the same one used in the Nagra VPS and is wound at the Nagra factory in Switzerland. After it comes an all-discrete circuit in a dual-mono layout, with military-grade transistors selected individually and operating in class A. Its internal power supply uses ultra-high rejection ratio regulators coupled with a dual-stage filter. Nagra states that the signal path was simplified and shortened as much as possible.

Cartridge loading is set by a resistor on a mini-XLR plug. A 100 ohm load is supplied, which Nagra calls an average value for most cartridges on the market, and a kit with other values is available. The housing is machined from a solid billet of aluminium, and its lower metal sheet is damped with 3M damping tapes against internal vibration. It can rest on a Nagra VFS or on the Compact VFS designed for the Compact range. Operating temperature is +15 to +35 °C, indoors only, and warranty is three years.

Pairing

HIGH gain is recommended for cartridges below 0.7 mV and LOW gain above 0.7 mV. With an optional Lemo to DC cable it runs from a Nagra ACPS III, MPS or Classic PSU, and Nagra names the Classic PSU as the best option. A line-level preamplifier input is required.

Alternatives

The Nagra HD PHONO is the higher-level phono stage of the brand.

Spezifikationen

  • Modellbezeichnung

    Compact Phono

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    N/A

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    10

  • Verstärkung (dB)

    47.5 - 62

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50000

  • Klirrfaktor + Rauschen (%)

    0.1

  • Abmessungen (mm)

    185 x 166 x 41

  • Gewicht (kg)

    1.9

  • Offizieller Link