The Spheris Phono is a two-chassis tube phono stage from Ayon Audio of Austria, made in limited production. It is a stereo design operating in pure Class A with triodes, with single-ended and balanced outputs. Its power comes from the external Spheris AC ReGenerator, which supplies stable, regulated AC independent of the incoming mains quality. It is the only phono stage in Ayon's range.
Key specs that matter
Tube complement is 6H30 and 6SL7, selected and matched for phono amplification. Inputs are 2 x phono RCA with 2 load settings, and outputs are 1 x RCA and 1 x XLR. Ayon specifies use with cartridges down to 0.1 mV. Maximum output is 5 Vrms (1 kHz), output impedance is about 300 ohms, and S/N ratio is above 100 dB. Frequency response is 10 Hz - 80 kHz, and harmonic distortion is below 0.1% (at 1 V). The AC ReGenerator is rated at max. 300 W and has a 60 Hz frequency meter. Each chassis measures 50 x 43 x 11 cm (W x D x H), and the two weigh 46 kg together. Chassis finish is black or chrome.
Engineering and use context
Gain comes from a single tube stage, and only one coupling capacitor is in the circuit, at the output stage. There are no solid-state devices and no followers or buffers in the signal path, and the circuit has 0 dB of negative feedback of any kind. RIAA equalisation is passive, using super-perm alloy LCR transformers. Its transformer set also includes an MC phono step transformer and a balanced output step transformer. Selecting MC1 or MC2 engages relays located near the RCA input jacks.
Inside the ReGenerator chassis is a tube-rectified supply with two separate, low-noise insulated power transformers, encased and RFI/EMI shielded. The supply is triple-choke filtered, each stage of amplification has its own isolated supply, and the DC filament supplies are regulated with soft-start power up. Grounding is a central one-point star earth with a switchable dual grounding system and a ground switch.
Ayon makes the tube sockets with beryllium-copper spring pins, and the circuit uses 0.5% tantalum resistors, Rifa capacitors and a gold-plated PCB. Connectors are WBT RCA and Neutrik XLR. Both chassis are brushed anodised, non-magnetic aluminium, assembled by hand, with engraved panels and resonance-absorbing aluminium feet.
Pairing
A preamplifier with a balanced XLR or single-ended RCA line input is required. Its two phono inputs allow two tonearms to be connected. The matching line preamplifier is the Ayon Spheris EVO.
Alternatives
Ayon Audio has no other phono stage in its current range.