Hifiverse

Phonovorstufen - Air Tight ATE-3011

Beschreibung, Bilder, technische Daten und Spezifikationen

Air Tight ATE-3011
Bildquelle - (c) Air Tight

The ATE-3011 Reference Phonostage is a tube phono stage from Air Tight, the brand of A&M Limited of Japan. Air Tight spent more than three years of listening tests on its development. Its main feature is a variable equalising curve, with five curves assigned to both turnover and roll-off.

Key specs that matter

Tube complement is three 12AX7. There are three RCA MM phono inputs with an input impedance of 47 kohms and a gain of 40 dB. Outputs are two RCA plus one monaural output, and the recommended total load is above 47 kohms. THD is 0.02% (1 V/1 kHz). Frequency response is 50 Hz - 20 kHz (±0.2 dB), -2.5 dB at 20 Hz. Power consumption is 50 VA. Dimensions are 400 x 375 x 151 mm (W x D x H), and weight is 12.2 kg.

Engineering and use context

An NF-CR type phono equaliser circuit is used. Turnover and roll-off each offer RIAA, NAB, AES, FFRR and FLAT positions, the FLAT position being intended for American 78 rpm records, and further curves can be created by combining the two selectors. A large self-lighting LED display shows the selected curve. Both selectors are of the shorting type to reduce shock noise.

Film capacitors are used in the coupling circuit and also in the decoupling circuit. The amplifying section is a separate unit housed in an inner chassis. Its three 12AX7 dual triodes are placed in parallel at the centre of the main chassis, with the circuits for the left and right channels on a thick copper plate above and below the tubes. All mica capacitors and the large decoupling capacitors are grouped in one place. Two large toroidal transformers are used to reduce leakage flux.

Air Tight provides neither a step-up transformer nor a head amplifier, to avoid noise and hum loops. All three phono inputs are selected by a front switch. Left and right input and output signals run through stainless pipes instead of conventional shielded cables up to the equaliser input, and each input has its own ground terminal. A muting relay circuit prevents noise when the power is turned on.

Pairing

An MM cartridge is required, or a low-output MC cartridge through an external step-up transformer or head amplifier. A line-level input on a preamplifier or integrated amplifier is required. The monaural output connects to a mono system.

Alternatives

The ATE-2005 is another Air Tight phono equaliser amplifier, with selected ECC83 tubes and four independent circuit sections.

Spezifikationen

  • Modellbezeichnung

    ATE-3011

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    2

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    47 000

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    40

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    50

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Klirrfaktor + Rauschen (%)

    0.02

  • Abmessungen (mm)

    400 × 375 × 151

  • Gewicht (kg)

    12.2

  • Offizieller Link