The Apprentice MM mk4 is the fourth generation of the moving magnet phono stage from Edwards Audio, a British company that hand-builds its electronics in Wiltshire. Edwards Audio unveiled it at the North West Audio Show 2025 together with the lower-priced Intro MM, at a UK price of GBP 149.95 including VAT. Circuit and basic figures carry over from the mk3, and the changes for the mk4 concern the enclosure and the power supply. Six finishes are listed - black, grey, white, red, blue and green.
Key specs that matter
Gain is 42.5 dB (1 kHz). Input loading is fixed at 47 kohms and 120 pF, and input overload is 72 mV. Signal-to-noise ratio is 81 dB (5 mV input). Frequency response is 10 Hz - 100 kHz (±3 dB), and RIAA accuracy is ±0.25 dB (20 Hz - 20 kHz). Maximum output is 11.0 V RMS, with an output impedance below 10 ohms. Power consumption is 1 W at 230 V. On the mains side sits an internal T250mA anti-surge fuse, 20 mm size.
Engineering and use context
For the mk4, Edwards Audio moved to a non-magnetic aluminium chassis and added a new acrylic top. The company says the aluminium chassis reduces interference. Its body is finished in black with a 3 mm aluminium front panel. The internal power supply was reworked at the same time and cuts consumption from 3 W to 1 W. With the supply inside the case, only a mains cable is needed. The Intro MM, by contrast, runs from an external low-noise plug-top power supply.
Pairing
A moving magnet cartridge is required. There are no loading settings for moving coil cartridges. The output connects to a line-level input of an integrated amplifier or preamplifier. Edwards Audio positions the Apprentice MM mk4 as an affordable stage between the turntable and the amplifier.
Alternatives
The Edwards Audio Intro MM is the lower-priced moving magnet phono stage from the same maker at GBP 99.95, housed in a compact non-magnetic aluminium enclosure and rated at 80 dB signal-to-noise.