The Boulder 2108 is the phono preamplifier of the 2100 Series from Boulder Amplifiers of Louisville, Colorado. It succeeds the 2008 Phono Preamplifier, released in 2002, and was launched in 2019. Audio circuitry and power supply occupy two separate chassis, and three pairs of balanced inputs take three different turntable, tonearm or cartridge combinations, selected at the push of a button.
Key specs that matter
Inputs are three pairs balanced and outputs two pairs balanced, all on 3-pin XLR and convertible to unbalanced. Maximum input impedance is 1000 ohms (MC) and 47 kohms (MM), with resistive and capacitive loading adjustable on individual Personality Cards. Output impedance is 100 ohms balanced. 1 kHz gain (RIAA) is 70 or 60 dB for MC and 50 or 40 dB for MM. RIAA frequency response is ±0.1 dB (20 Hz - 20 kHz), THD is 0.005%, crosstalk is -100 dB or better (20 Hz - 20 kHz) and maximum output level is 28 Vrms. Equalisation curves are RIAA, FFRR (London/Decca), EMI and Columbia. The phono preamplifier measures 457 x 394 x 127 mm (W x D x H) and weighs 16.8 kg, the power supply weighs 21.8 kg, and power consumption is 75 W maximum.
Engineering and use context
Boulder describes the 2108 as a dual-chassis, dual-mono design. Inside the power supply chassis are four independent supplies - analogue left, analogue right, logic and control, and standby. Each of the three supplies used during operation has its own transformer and regulation, and the standby supply is disconnected from the audio circuitry when not in use. Mains voltage can be set to 100, 120, 200 or 240 V.
Gain stages are Boulder's proprietary, modular and discrete 995S, exclusive to the 2108, hand-manufactured and calibrated to spec in a potted, precision-machined housing. Balanced operation is maintained throughout. Loading is set with a single resistor and a pair of rigid, low-resistance connections, with no relays or switches before the first gain stage. RIAA equalisation is an active two-stage filter. On the left audio, right audio and logic and control boards, surface-mount design is used wherever possible.
Front-panel functions run on simple logic circuits with no host computer or microprocessor - Standby, demagnetiser pass-through for specific MC cartridges, Mono, EQ selection, a three-setting low-cut filter for turntable rumble and warped records, and input selection. All casework is machined from solid aluminium.
Pairing
A preamplifier with balanced XLR line inputs is required. The matching line preamplifier in the 2100 Series is the 2110. Each Personality Card is set for the cartridge on its input.
Alternatives
The 1108 is Boulder's single-chassis phono preamplifier of the 1100 Series.