Hifiverse

Tonabnehmer - My Sonic Lab Signature Platinum

Beschreibung, Bilder, technische Daten und Spezifikationen

My Sonic Lab Signature Platinum
Bildquelle - (c) My Sonic Lab

My Sonic Lab builds the Signature Platinum MC cartridge. Cartridge designer Yoshio Matsudaira founded the Japanese company in 2004, and his earlier clients included Koetsu, Air Tight, Miyabi, Luxman, Supex and Audio Craft. The Platinum builds upon the design of the Signature Gold, the model released for the brand's 10th anniversary with an Extra Super Duralumin A7075 body and a Super Duralumin cantilever. Its list price is USD 10,995, and it is usually made to order.

Key specs that matter

Type is moving coil with an SH-uX core. The body is Black Ion Hardened Titanium. A boron pipe cantilever carries a semi-line contact stylus. Output voltage is 0.5 mV, and internal impedance is 1.4 ohms. Recommended loading is 100 - 800 ohms, ideal around 400 ohms. Compliance is 10 x 10-6 cm/dyne. Recommended tracking force is 1.9 - 2.2 g, and weight is 13 g.

Engineering and use context

Every My Sonic Lab cartridge uses the SH-uX magnetic core developed by Matsudaira. According to the company, this core material has higher permeability and flux density than the iron core typically used in MC cartridges. It allows fewer coil windings than in other moving coil designs, and My Sonic Lab credits it with combining very low internal impedance and high output. The stated design goal is minimal signal loss, internal distortion and phase distortion.

Boron is lighter and more rigid than aluminium for cantilevers, and the Signature Platinum is only the second model in the range to use a boron pipe. Its titanium body is hardened by a black ion treatment and replaces the duralumin body of the Signature Gold. Each cartridge ships in packaging crafted by Takamine Guitars.

Pairing

A step-up transformer or a high-gain MC phono stage is required. A phono stage with selectable resistive loading matches the recommended range. The matching headshell is the My Sonic Lab SH-1rh, made of hard anodised A6063S aluminium alloy and weighing 14 g.

Alternatives

The My Sonic Lab Ultra Eminent EX pairs a boron cantilever with an A7075 duralumin body and gives 0.3 mV from 0.6 ohms.

Spezifikationen

  • Modellbezeichnung

    Signature Platinum

  • Typ

    MC

  • Nadel

    Semi-line contact

  • Gehäuse

    Black Ion Titanium

  • Nadelträger

    Boron

  • Spulen

    N/A

  • Ausgangsspannung (mV@5cm/sec)

    0.5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Innenwiderstand (Ohm)

    1.4

  • Kanaltrennung (dB / 1,000 Hz)

    N/A

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    10

  • Empfohlene Abschlussimpedanz (Ohm)

    100-800

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    13

  • Offizieller Link