Hifiverse

Tonabnehmer - Air Tight PC-1 Supreme

Beschreibung, Bilder, technische Daten und Spezifikationen

Air Tight PC-1 Supreme
Bildquelle - (c) Air Tight

The PC-1 Supreme is an ultra-low impedance moving coil cartridge from Air Tight. It uses a boron cantilever supported by a step-taper duralumin pipe plus a semi-line stylus with a 0.1mm-square diamond and a 3 x 30 micron contact profile.

Key specs that matter

Output is 0.4mV at 1kHz and internal impedance is 1 ohm DCR. Frequency response is 10Hz to 50kHz, channel balance within 0.5dB and crosstalk better than 30dB at 1kHz. Dynamic compliance is 8 x 10-6 cm/dyne, recommended tracking force 1.9 to 2.2g, and the cartridge weighs 12g.

Engineering and use context

The magnetic circuit combines a neodymium #50 magnet with SH-uX high permeability core material. Thick coil wire keeps the number of turns low, which explains the very low internal impedance. The low output calls for a step-up device or a high gain MC phono input.

Alternatives

Air Tight's later PC-1 coda is the successor moving coil cartridge in the same series.

Spezifikationen

  • Modellbezeichnung

    PC-1 Supreme

  • Typ

    MC

  • Nadel

    N/A

  • Gehäuse

    N/A

  • Nadelträger

    boron

  • Spulen

    N/A

  • Ausgangsspannung (mV@5cm/sec)

    0.4

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Innenwiderstand (Ohm)

    1

  • Kanaltrennung (dB / 1,000 Hz)

    N/A

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    8

  • Empfohlene Abschlussimpedanz (Ohm)

    N/A

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    12

  • Offizieller Link

Weitere Komponenten