Hifiverse

Tonabnehmer - Koetsu Onyx Platinum

Beschreibung, Bilder, technische Daten und Spezifikationen

Koetsu Onyx Platinum
Bildquelle - (c) Koetsu

The Onyx Platinum is a moving-coil cartridge from Koetsu of Japan, one of the stone body models in the range. Koetsu was started by Yoshiaki Sugano and named in honour of the Japanese artist Honami Koetsu. His son Fumihiko Sugano, who apprenticed under him, continued the work until his death in 2023, and every Koetsu was hand made in Japan in limited numbers. The family has decided not to be involved in production, so the remaining cartridges are a finite series.

Key specs that matter

Type is MC with an onyx stone body and a boron cantilever. Coil wiring is silver-plated copper, and the magnet is platinum. Output is 0.3 mV. Recommended tracking force is 1.8 - 2.0 g, and recommended load is 75 - 500 ohms. Net weight is 12.5 g.

Engineering and use context

Its body is machined from a block of high quality stone. Each block is selected for natural grain and polished to a very fine finish. Inside, Koetsu uses only the most tightly matched silver-sheathed copper coils and cores, together with rare platinum magnets. According to Koetsu USA, Yoshiaki Sugano pioneered high purity materials such as 6N copper and platinum iron magnets in his cartridges.

Pairing

A phono stage with an MC input or a step-up transformer is required. Its load setting has to fall within the range Koetsu recommends. A tonearm whose counterweight balances a stone body cartridge is required.

Alternatives

The Rhodonite is another Koetsu stone body cartridge, with platinum magnet, boron cantilever and a net weight of 13.5 g.

Spezifikationen

  • Modellbezeichnung

    Onyx Platinum

  • Typ

    MC

  • Nadel

    N/A

  • Gehäuse

    Onyx Stone

  • Nadelträger

    Boron

  • Spulen

    Silverplated Copper

  • Ausgangsspannung (mV@5cm/sec)

    0.3

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Innenwiderstand (Ohm)

    N/A

  • Kanaltrennung (dB / 1,000 Hz)

    N/A

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    N/A

  • Empfohlene Abschlussimpedanz (Ohm)

    75 - 500

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    12.5

  • Offizieller Link