Hifiverse

Tonabnehmer - Dartzeel NDB-01D

Beschreibung, Bilder, technische Daten und Spezifikationen

Dartzeel NDB-01D
Bildquelle - (c) Dartzeel

The NDB-01D is the top moving-coil cartridge from darTZeel, the Swiss electronics maker based in Geneva. Each NDB-01D is assembled by hand. It combines a diamond cantilever with a body carved from tinted, hardened wood, and its price is about USD 41,000. The model sits above the NDB-02R in darTZeel's two-cartridge range.

Key specs that matter

Type is moving coil. The cantilever is a square-shank diamond rod, and it carries a hand-polished natural nude diamond stylus. Coils are wound by hand from silver-coated pure copper as one continuous winding, and the coil armature is mounted on an acid-etched titanium support. Frequency response is 10 Hz - 110 kHz. Output voltage is 0.25 mV, and internal impedance is 4 ohms. Recommended tracking force is 2.2 g. Trackability is above 90 µm, and channel separation is above 33 dB. Compliance, cartridge weight, stylus profile and recommended load are not published by darTZeel.

Engineering and use context

Diamond is used for both the cantilever and the stylus. The stylus is nude, meaning the diamond is mounted in the rod with no metal shank of its own. On the generator side, a single continuous winding leaves no joints inside the coils, and the silver coating covers the surface of the copper conductor. Titanium for the armature support is shaped by acid etching.

Its body is carved rather than moulded, and the wood is tinted and hardened before finishing. Each body is therefore shaped individually. An output of 0.25 mV places the NDB-01D among low-output moving-coil designs, and the internal impedance of 4 ohms is in the same low range. The frequency response extends to 110 kHz, well beyond the audio band.

Pairing

A phono stage with high moving-coil gain, or a step-up transformer, is required. The 4 ohm internal impedance allows step-up transformers with a high ratio.

Alternatives

The darTZeel NDB-02R is the lower model with a ruby cantilever and a frequency response extending to 100 kHz.

Spezifikationen

  • Modellbezeichnung

    NDB-01D

  • Typ

    MC

  • Nadel

    N/A

  • Gehäuse

    Tinted Tempered Wood

  • Nadelträger

    N/A

  • Spulen

    N/A

  • Ausgangsspannung (mV@5cm/sec)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    110 000

  • Innenwiderstand (Ohm)

    4

  • Kanaltrennung (dB / 1,000 Hz)

    N/A

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    >33

  • Empfohlene Abschlussimpedanz (Ohm)

    N/A

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    N/A

  • Offizieller Link