Hifiverse

Tonabnehmer - Excalibur Midnight Blue

Beschreibung, Bilder, technische Daten und Spezifikationen

Excalibur Midnight Blue
Bildquelle - (c) Excalibur

The Excalibur Midnight Blue is a low-output MC cartridge that went on sale in Germany in November 2025 at a suggested price of EUR 1,899. Excalibur is the cartridge brand of TAD-Audiovertrieb GmbH, based in Prien am Chiemsee in Bavaria. TAD presents the Midnight Blue as the start of a new chapter in the Excalibur series, with a body material and colour not used on earlier models.

Key specs that matter

Output voltage is 0.5 mV (1 kHz), channel balance is below 0.5 dB (1 kHz) and channel separation is 25 dB (1 kHz). Frequency response is 10 Hz - 40 kHz. Its impedance is 7.5 ohms (1 kHz), with a recommended load impedance above 100 ohms. Compliance is rated as medium, at 10 x 10-6 cm/dyne, and the recommended tracking force is 2 g. A natural diamond stylus with a Microridge cut sits on a boron cantilever. Weight is 8.7 g.

Engineering and use context

Delrin, the high-performance plastic polyoxymethylene (POM), forms the cartridge body. TAD lists high strength, hardness, low friction and very good machinability as the reasons for this choice. Its exclusive Midnight Blue finish gives the model its name.

Boron is the cantilever material, and TAD specifies it for maximum stiffness and low resonance. Mounted at its tip is a real diamond with a Microridge cut. The magnet system uses an Alnico magnet.

Design and development take place in-house at TAD, while production of each Excalibur cartridge is carried out in Japan.

Pairing

A phono stage with an MC input for low-output cartridges, or a step-up transformer, is required, with a load impedance above 100 ohms. A tonearm suited to a medium-compliance cartridge is required.

Alternatives

The Excalibur Platinum is a lower-priced low-output MC with a boron cantilever, a nude MicroRidge diamond and a metallised body weighing 5.4 g.

Spezifikationen

  • Modellbezeichnung

    Midnight Blue

  • Typ

    MC

  • Nadel

    Natural diamond, Microridge profile

  • Gehäuse

    Delrin

  • Nadelträger

    Boron

  • Spulen

    N/A

  • Ausgangsspannung (mV@5cm/sec)

    0,5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Innenwiderstand (Ohm)

    7.5

  • Kanaltrennung (dB / 1,000 Hz)

    25

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    10

  • Empfohlene Abschlussimpedanz (Ohm)

    >100

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    8.7

  • Offizieller Link