Hifiverse

Tonabnehmer - IKEDA Sound Lab KOHAKU

Beschreibung, Bilder, technische Daten und Spezifikationen

IKEDA Sound Lab KOHAKU
Bildquelle - (c) IKEDA Sound Lab

KOHAKU is the 40th anniversary MC cartridge of IKEDA Sound Labs of Kunitachi, Tokyo. Its name combines the Japanese characters for clear and for platinum. It was released on 7 July 2025 in a limited run of 30 units worldwide, and production has ended. Cartridge builder Akiko Ishiyama spent a year on prototypes and listening before completing it, and the cartridge is manufactured by Itei Kogyo, which marked its own 50th anniversary at the same time.

Key specs that matter

Type is moving coil. Output voltage is 0.5 mV, the highest of any IKEDA cartridge. Coil impedance is 4.0 ohms. Tracking force is 1.5 - 1.8 g, with 1.75 g recommended. Weight is 12.5 g. The cantilever is an integrated single-crystal diamond cantilever, the stylus tip has a MicroRidge profile, and the generator coil is wound with silver wire.

Engineering and use context

For the first time in IKEDA's history the cantilever and stylus are formed in one piece of diamond, with no joint between them. The suspension uses a dual damper made of two elements of different hardness. IKEDA's earlier MC cartridges have a single damper, and IKEDA gives stable operation and further suppression of unwanted resonance as the aims of the dual design.

Body and base are machined from extra super duralumin, the highest-strength aluminium alloy, then buff-polished and platinum-plated. Platinum plating, another first for IKEDA, also covers the terminal pins and screws, and it was chosen for its high conductivity and resistance to rust and discolouration. Inside, the inner base is made from a special vibration-damping alloy. Silver generator coil wire is a first for a non-custom IKEDA model, selected after trials with 4N OFC and PCOCC wire. A symbol mark above the model name is printed in two layers of silk-screen, white and then yellow.

Pairing

A phono stage with an MC input for low-output, low-impedance cartridges, or a step-up transformer, is required. The IKEDA IS-2TCR1 tonearm is not included.

Alternatives

The IKEDA Akiko is another IKEDA moving-coil cartridge, rated at 0.35 mV output and 6.0 ohms coil impedance.

Spezifikationen

  • Modellbezeichnung

    KOHAKU

  • Typ

    MC

  • Nadel

    N/A

  • Gehäuse

    With platinum coating

  • Nadelträger

    Diamond

  • Spulen

    Silver wire

  • Ausgangsspannung (mV@5cm/sec)

    0.5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Innenwiderstand (Ohm)

    4

  • Kanaltrennung (dB / 1,000 Hz)

    N/A

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    N/A

  • Empfohlene Abschlussimpedanz (Ohm)

    N/A

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    12.5

  • Offizieller Link