The IQ III is the top model of the IQ moving magnet cartridge range from Audio Note (UK), above the IQ I and IQ II. All three are built on the same Pocon body, and the IQ III differs in its cantilever and diamond, both shared with the IO I, the Audio Note moving coil cartridge. Audio Note lists it in black only, with a one-year warranty.
Key specs that matter
Sensitivity is 6.5 mV ±1.5 dB (1 kHz, 5 cm/s), and frequency response is 20 Hz - 20 kHz (±2 dB). Internal resistance is 660 ohms, with an internal inductance of 570 mH. Recommended load is 47 kOhm and 150 - 200 pF. Channel separation is 25 dB at 1 kHz, and channel balance is 2 dB at 1 kHz. Static compliance is 24 mm/N lateral and 16 mm/N vertical. Equivalent tip mass is 0.45 mg, and the vertical tracking angle is 24 degrees. Tracking force is 1.5 - 2.5 g, 1.75 g nominal. It weighs 6.3 g and has 12.7 mm fixing centres.
Engineering and use context
Its cantilever is titanium tube rather than the hardened aluminium tube of the IQ I and IQ II, and it carries an Audio Note Type 2 diamond. Audio Note describes this titanium cantilever as unique. Coils are wound from very fine copper wire.
Pocon, a rigid yet lightweight material, forms the body, which has integral threaded inserts for mounting in the tonearm headshell. Audio Note states that this system improves mechanical coupling between body and headshell compared with traditional nut and bolt fixing. The complete stylus assembly is removable, and every IQ stylus assembly fits every IQ body, and an IQ I or IQ II can be converted to IQ III status with the IQ III stylus assembly alone.
In the clear acrylic box come the cartridge with stylus and stylus guard installed, a pair of hex head mounting bolts and a wrench. The four connection pins use the international colour code and are not to be soldered. Audio Note puts the operating life at roughly 1000 to 3000 hours, depending on use.
Pairing
A moving magnet phono input of 47 kOhm is required. Total parallel capacitance, including arm lead and amplifier input, must stay at or below 200 pF. A step-up transformer is not needed.
Alternatives
The Audio Note IQ II is the middle model of the range, with a hardened aluminium cantilever and an Audio Note Type 2 stylus.