Hifiverse

Tonabnehmer - Miyajima-Lab Carbon stereo

Beschreibung, Bilder, technische Daten und Spezifikationen

Miyajima-Lab Carbon stereo
Bildquelle - (c) Miyajima-Lab

The Carbon is a stereo moving-coil cartridge from Miyajima Laboratory of Japan, announced in 2022. Miyajima bases it on the balance of its Takumi model and adds a line-contact stylus that raises the frequency response. The name refers to the carbon nanofibers inserted into its cantilever. Like every Miyajima cartridge it has a wooden body, here in Satine, and like every Miyajima stereo model it uses the company's patented cross ring method.

Key specs that matter

Impedance is about 16 ohms and output about 0.21 mV. Frequency range is 20 Hz - 32 kHz (-3 dB). Recommended tracking force is 2.3 g, and the stylus is a line-contact diamond. Compliance is around 9 x 10-6 cm/dyne at 10 Hz. Weight is about 8.9 g, and the body measures 18.8 x 21.9 mm (W x D, excluding terminals). Miyajima specifies a suitable operating temperature of 20 - 30 °C, with 25 °C as the optimum.

Engineering and use context

In the cross ring method the left and right coils cross each other, so their centre points coincide, and this common centre point is the fulcrum of the moving system. A conventional moving-coil cartridge, as Miyajima describes it, carries a square iron core on the cantilever, with the coils wound on the core, a wire through its centre and a rubber damper fixing it to the yoke. Its movement point therefore lies in the rubber damper outside the coil. With the fulcrum inside the coil, Miyajima replaces the iron core with resin and removes the influence of the magnetic force on the moving parts. The cross ring was completed in theory seven years before it became a product.

Each Carbon keeps the thin cantilever of the Takumi, with carbon nanofibers inserted into it. Its Satine body is 1 mm wider than the 17.8 mm Takumi body, and the two share the same tracking force, compliance and frequency range. Elsewhere in the range Miyajima uses other cantilever materials, with Japanese cactus spine on the Saboten and madake bamboo on the Madake.

Pairing

A high-gain moving-coil phono stage or a step-up transformer is required.

Alternatives

The Takumi is the Miyajima stereo moving-coil cartridge the Carbon is based on, with an African Blackwood body and a line-contact stylus.

Spezifikationen

  • Modellbezeichnung

    Carbon stereo

  • Typ

    MC

  • Nadel

    Line Contact diamond

  • Gehäuse

    wood

  • Nadelträger

    N/A

  • Spulen

    N/A

  • Ausgangsspannung (mV@5cm/sec)

    0.21

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    32000

  • Innenwiderstand (Ohm)

    16

  • Kanaltrennung (dB / 1,000 Hz)

    N/A

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    9 (at 10 Hz)

  • Empfohlene Abschlussimpedanz (Ohm)

    N/A

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    8.9

  • Offizieller Link