The ST5 is a network streamer in the Radia series from Arcam. It was unveiled in London on 3 October 2023 together with the A5, A15 and A25 integrated amplifiers and the CD5 disc player, and reached retail in the fourth quarter of that year at GBP 799, EUR 949 and USD 799. Arcam describes it as the high resolution upgrade for its Radia integrated amplifiers, in a slim case with a control link to them.
Key specs that matter
Conversion uses an ESS ES9018K2M DAC with time domain jitter elimination. Outputs are one stereo RCA analogue pair, one coaxial RCA digital output and one Toslink optical output. Hi-res playback covers FLAC, WAV (LPCM), MQA, AAC, ALAC and AIFF at 16 or 24 bit and 44.1 - 192 kHz, plus DSD128, and MP3, MP4, OGG and WMA play at 16 bit and 44.1 or 48 kHz, with gapless playback. Frequency response is 20 Hz - 20 kHz (±0.05 dB, filter 1). Arcam specifies 115 dB signal-to-noise ratio (A-weighted), THD below 0.007% (1 kHz), 2.0 V rms fixed output level, 47 ohms output impedance and jitter below 20 ps rms. Its case measures 431 x 344 x 57 mm (W x D x H) and weighs 3.5 kg net. Power consumption is 12 W, or under 0.5 W in eco standby.
Engineering and use context
Network connection is by Ethernet (10/100 Mbps) or Wi-Fi (802.11b/g/n). The ST5 plays Qobuz Connect, Tidal Connect and Spotify Connect natively and is Roon Ready, all with hi-res and MQA support, and Apple AirPlay and Google Cast are also available. Wi-Fi setup runs through the ARCAM Radia app, which also gives access to internet radio presets, podcasts, connected USB media and UPnP network storage. On the rear panel, a USB 2.0 High Speed socket plays files from a USB flash drive and is also used for software updates.
In the settings menu the output type is analogue or digital, with full or partial MQA decoding. Volume output is variable, fixed or external, and a choice of digital filters for the analogue outputs is offered, with Fast as default. A supplied control cable connects the CONTROL socket of the ST5 to an Arcam Radia amplifier, and the pair then shares input selection and volume while keeping separate chassis and power supplies. The remote control comes with two AAA batteries, and the packaging is plastic-free.
Pairing
The matching amplifiers are the Arcam A5+ and A15+ with the control link. Any amplifier with a line-level RCA input accepts the analogue output. An external DAC or AV receiver connects to the coaxial or optical output.
Alternatives
The ST60 is Arcam's other network streamer, with an ESS9038Q2M Sabre DAC and balanced XLR and single-ended RCA analogue outputs.