Hifiverse

Streamer - Axxess Forté 1

Beschreibung, Bilder, technische Daten und Spezifikationen

Axxess Forté 1
Bildquelle - (c) Axxess

The Forté 1 is the entry level of the Forté streaming amplifier series from Axxess, the brand Audio Group Denmark added alongside Ansuz, Aavik and Børresen. Its series has three levels, Forté 1, 2 and 3, and each one combines a streamer, a DAC, an integrated amplifier and a headphone amplifier in one chassis. Axxess products are handcrafted in Denmark. Launch prices in early 2025 were GBP 4,999, USD 5,500 or EUR 5,000.

Key specs that matter

Output power is 2 x 100 W into 8 ohms. Digital inputs are one Toslink optical, one BNC S/PDIF and one USB B, and there is one RCA line input. Network connection is a single RJ-45 LAN port, and two USB A ports accept storage drives of up to 2 TB. On the output side are one pair of speaker terminals, an RCA pre out and a 6.35 mm headphone jack. Dimensions are 370 x 420 x 110 mm (W x D x H), and weight is 7.9 kg. Finish is black.

Engineering and use context

For noise reduction the Forté 1 is equipped with 36 active Tesla coils, 72 active square Tesla coils and 3 dither circuits. Zirconium Tesla coils and the bottom copper plate are reserved for the higher levels. Ansuz Tesla coil technologies have appeared in Audio Group Denmark products since 2011.

Its amplifier section uses UMAC amplifier technology, which Axxess describes as inspired by the Aavik development approach and designed for stability, reliability and precision. An Aavik-inspired resonant mode power supply increases the operating frequency and allows higher peak power, and ultra-low noise controls power the various parts of the circuit to lower the noise floor further.

Conversion is by a 1-bit DAC circuit developed in-house instead of a multi-bit design. According to Axxess, the streamer module is inspired by the one used in the Aavik streamers and is designed as a dedicated audio unit with high quality capacitors and no microcomputers. A separate headphone section is a non-switching class A amplifier, specified for linearity, high gain and low signal distortion. Top and bottom panels are a natural-based composite material chosen to reduce mechanical hysteresis, a material Aavik first used in 2020.

Pairing

The unit is Roon Ready and supports Qobuz Connect, with control from the AGD Streaming App. Loudspeakers rated for an 8 ohm load connect to the single pair of terminals. The RCA pre out allows connection of an external power amplifier.

Alternatives

The Axxess Forté 2 is the middle level, with 72 active Tesla coils, 144 active square Tesla coils, 4 zirconium Tesla coils and 6 dither circuits.

Spezifikationen

  • Modellbezeichnung

    Forté 1

  • Verfügt über internen DAC

    Ja

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 32 bit / 384 kHz and DSD256

  • DSP-Verarbeitung

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Analogausgangspegel (symmetrisch) (V)

    N/A

  • Analogausgangspegel (unsymmetrisch) (V)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (% at 22 kHz)

    N/A

  • Abmessungen (mm)

    370 x 420 x 110

  • Gewicht (kg)

    7.9

  • Offizieller Link

Weitere Komponenten