The element X2 is a network music streamer with a built-in DAC, preamplifier and headphone amplifier from Matrix Audio of China. It is the second generation of the Matrix element series and works as a stand-alone source that connects directly to power amplifiers or active speakers. Besides network playback it has several digital inputs, an analogue RCA input and HDMI ARC for a television.
Key specs that matter
The hardware platform is an NXP i.MX 6Quad Cortex-A9 CPU, an ES9038PRO D/A chip and a Crystek CCHD-950 clock. USB and I2S (LVDS) accept PCM up to 768 kHz and native DSD up to 22.4 MHz, and USB also decodes MQA. Coaxial, optical and HDMI ARC inputs accept PCM up to 24-bit/192 kHz. On the XLR line output signal-to-noise ratio is 131 dB (A-weighted), THD+N is <0.00012% at 1 kHz and response is 20 Hz - 20 kHz (±0.05 dB), -3 dB at 85 kHz. Output level is 4.5 Vrms at 0 dB and 15.8 Vrms at +10 dB, against 2.2 Vrms and 7.5 Vrms on RCA. The 4.4 mm balanced headphone output delivers 2,600 mW into 33 ohms and 580 mW into 600 ohms (1% THD), with <12 ohms output impedance and +18 or +28 dB gain. Dimensions are 340 x 58 x 259 mm (W x H x D) and weight is 4 kg.
Engineering and use context
Matrix offers two clock modes. In Async mode the D/A chip takes its master clock from the Crystek CCHD-950 femtosecond clock and the source clock is discarded. In Sync mode this clock is turned off and the D/A chip depends on the clock of the source. Two independent power supplies serve the ARM processor and the digital audio section, which sit in separate circuit units joined by optocouplers for electrical isolation. Its audio circuit has an independent linear power supply.
Inside the headphone amplifier are eight independent amplification units, connected in parallel pairs, in a fully balanced topology. A 6.35 mm unbalanced output sits next to the 4.4 mm socket. The preamplifier adds +10 dB of analogue gain. Its RCA analogue input accepts up to 2.1 Vrms with high, medium and low input gain settings. With HDMI CEC the television can control playback.
Network connections are a Gigabit Ethernet port and 2.4 GHz and 5 GHz Wi-Fi, with Roon Ready, AirPlay 2, DLNA/UPnP, Spotify Connect and TIDAL Connect support. Local files play from USB drives or a NAS. The front has a 3.46-inch LCD touch screen, and the MA Remote App sets every hardware configuration. An RM4 remote control with two programmable buttons is supplied. Trigger in accepts 6-12 V DC, and trigger out gives 12 V DC.
Pairing
The variable XLR or RCA line output connects to a power amplifier or active speakers. A turntable connects to the RCA input only through a phono stage with line output.
Alternatives
The element X2 Pure is the Matrix Audio music streamer with a dual D/A design.