The DMS-550 is a network audio player and DAC from Cary Audio of Raleigh, North Carolina. Cary announced it on 2 November 2018 as a direct replacement for the DMS-500, at a retail price of USD 5,495. Compared with its predecessor it adds a built-in headphone amplifier, aptX HD Bluetooth and the Qobuz service. Files play from network storage, internet services, USB drives and SD cards, and external digital sources connect to its inputs.
Key specs that matter
Conversion uses two 2-channel AKM AK4493EQ chips for true balanced output, a 32-bit 8x oversampling digital filter and a 3rd order Bessel analogue filter. The USB inputs accept 44.1 - 384 kHz at 16 - 32 bit and DSD64 to DSD512, and the AES/EBU, coaxial and Toslink inputs 44.1 - 192 kHz at 16 - 24 bit. Cary lists 125 dB dynamic range, 113 dB signal-to-noise ratio, 107 dB channel separation and 0.0004% THD, all at 1 kHz. RCA output is 2.0 V rms at 0.0 dB volume and 3.0 V rms at +8.0 dB (220 ohms), with 440 ohms output impedance on XLR. Digital inputs are 3 x USB, 1 x SD card, 1 x AES/EBU, 2 x coaxial and 1 x Toslink, plus CSR Bluetooth 4.0 with aptX HD at 24 bit/48 kHz. The chassis measures 438 x 95 x 413 mm (W x H x D), weighs 10.7 kg and draws 45 W.
Engineering and use context
On the front panel, a Class A headphone amplifier with its own independent volume control drives a 6.35 mm jack, and the rear outputs are muted while headphones are connected. It delivers 850 mW per channel into 32 ohms (1 kHz, 0.002%) and up to 5.2 V rms into 8 - 600 ohms. Cary's TruBit upsampling runs on a dedicated 128-bit DSP engine with up to ten selectable sample rates and converts PCM to DSD64, DSD128 or DSD256. With OSO (Onboard Signal Origination) re-clocking, every incoming signal is buffered and re-clocked on board. MQA decoding uses second-generation filters with 16x rendering at 768 or 705.6 kHz.
The DMS-550 is Roon Ready and supports AirPlay, Qobuz and other internet services. Networking is by Ethernet or Wi-Fi 802.11 b/g/n/ac with MU-MIMO on the 5 GHz band. A 5-inch colour LCD shows playback data and settings, and control is by IR remote or iOS and Android apps. Coaxial and Toslink digital outputs run at 44.1 - 192 kHz.
Pairing
With its volume control the DMS-550 works as a digital preamplifier connected directly to a power amplifier. Balanced XLR and RCA outputs connect to an integrated amplifier or preamplifier. A 12 V trigger input and an IR control input are provided for system control.
Alternatives
The Cary Audio DMS-600 is the related network player with AK4497EQ converters and no headphone amplifier.