Hifiverse

PC & Server - XACT S1 EVO

Beschreibung, Bilder, technische Daten und Spezifikationen

XACT S1 EVO
Bildquelle - (c) XACT

The S1 EVO is a music server from XACT of Wroclaw, Poland. Its founder, Marcin Ostapowicz, also created the JPLAY playback software and the JCAT range of hardware. Developed from the XACT S1, the EVO took six years to design. Each unit is built to order, with a typical lead time of four weeks.

Key specs that matter

Playback is native and bit-perfect for DSD up to DSD512 and PCM up to 768 kHz. Supported files are DSF, DFF, FLAC, Apple Lossless (ALAC), WAV and AIFF, and MQA is passed through. Digital outputs are two USB Audio 2.0 ports, a main port and one without the 5 V power bus. There are six Gigabit Ethernet ports. Storage is a specially selected 4 TB SSD, with 8 TB available on request. The OPTIMO X1 linear power supply section has 140,000 uF of capacitance. Its aluminium chassis is fanless and measures 439 x 100 x 315 mm (W x H x D), and weight is 10 kg.

Engineering and use context

XACT developed the motherboard exclusively for high-end music playback. It carries only linear regulators and runs solely on linear power, and the dedicated power source has no switching components. Nichicon Muse capacitors are used in the OPTIMO X1 section.

Timing comes from a Master OCXO clock module developed entirely in-house. The operating system, XACT OS, was written from scratch for this hardware and loads from a specially selected SLC SD card. Inside, the storage is connected by the PHANTOM Music Drive Cable, built with the same materials and construction techniques as XACT's PHANTOM cables.

Both USB outputs use gold-plated, EMI-shielded connectors. On the RJ-45 sockets XACT uses built-in 12-core transformers for isolation, and the LAN port LEDs can be switched off to reduce noise. As an alternative function, the Ethernet section turns the S1 EVO into a network switch and router. XACT shows a dual setup in which one unit is the switch and router and a second unit is the music server.

Playback software is JPLAY, with support for local files and the TIDAL and Qobuz streaming services, and a lifetime licence is included. The unit stands on IMMOTUS isolation footers made of aerospace-grade aluminium and ceramics.

Pairing

A DAC with a USB Audio 2.0 input is required. For a DAC that does not draw USB bus power, the port without the 5 V bus is provided. Network connection is over Gigabit Ethernet.

Alternatives

The XACT S1 is the earlier music server from the same company.

Spezifikationen

  • Modellbezeichnung

    S1 EVO

  • Verfügt über internen Speicher

    k. A.

  • Interne Speicherkapazität (GB)

    N/A

  • Abmessungen (mm)

    439 x 315 x 100

  • Gewicht (kg)

    10

  • Offizieller Link