Hifiverse

DACs - EarMen Tradutto DAC

Beschreibung, Bilder, technische Daten und Spezifikationen

EarMen Tradutto DAC
Bildquelle - (c) EarMen

The Tradutto is a fully balanced desktop DAC from EarMen with a built-in Bluetooth receiver. EarMen announced it in September 2021 at GBP 599. In the US it was launched at USD 799 and later offered at USD 399. Its chassis is cut from one solid piece of aluminium, and a USB cable, a power adapter and a remote control come in the box.

Key specs that matter

Conversion uses an ESS Sabre ES9038Q2M chip, and the USB receiver is a 16-core XMOS XU216. PCM is accepted up to 32-bit/768 kHz and DXD at 768 kHz, DSD natively up to DSD512 and as DoP up to DSD256. MQA, MQA Studio and MQA Core are supported by a hardware MQA renderer. Bluetooth 5.1 reception runs on a Qualcomm QCC5124 chip with SBC, AAC, aptX, aptX HD and aptX LL at 44.1 - 192 kHz and 16 - 24 bit. Digital inputs are USB, optical and coaxial. Output level is 2 V RMS (0 dBFS) on RCA with 300 ohms output impedance and 4 V RMS on the 4.4 mm balanced socket with 600 ohms. THD+N is 0.0003%. Signal-to-noise ratio is above 116 dB single-ended and above 122 dB balanced, and frequency response is flat within 0.014 dB single-ended and 0.003 dB balanced. Dimensions are 150 x 30 x 150 mm, and weight is 550 g.

Engineering and use context

In this fully balanced design each channel runs as a pair of mirror-image signals from the converter chip to the output sockets. Both halves together give twice the voltage of the single-ended output, so level and noise figures are better on the balanced socket.

Its circuit is built on a gold-plated PCB with improved power filtering. According to EarMen, the reduced current draw keeps the circuit clear of interference from Wi-Fi, mobile phones and nearby Bluetooth devices. EarMen also quotes double the clock speed and four times the memory of many competing USB chips for the XU216. Final unfolding of MQA files takes place inside the DAC, in the hardware renderer.

On the analogue side, SoundPlus OPA1642 op-amps form the output stage. Around them are WIMA film capacitors, audio-grade electrolytic capacitors and low-noise MELF resistors.

Pairing

The RCA outputs connect to the line input of an integrated amplifier or preamplifier. An adapter cable from 4.4 mm to XLR is required for amplifiers with XLR inputs. The Tradutto has no headphone output, so a separate headphone amplifier is required.

Alternatives

The EarMen Eagle is the brand's compact USB stick DAC.

Spezifikationen

  • Modellbezeichnung

    Tradutto DAC

  • Wandlungstyp

    N/A

  • Wandlerchip

    N/A

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 24 bit / 768 kHz and DSD512

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    4

  • Ausgangspegel (unsymmetrisch) (V)

    2

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    600

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    300

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    >122

  • Klirrfaktor + Rauschen (% at 22 kHz)

    0.0003

  • Abmessungen (mm)

    150 x 30 x 150

  • Gewicht (kg)

    0.550

  • Offizieller Link