Hifiverse

DACs - MoFi Electronics STUDIODAC

Beschreibung, Bilder, technische Daten und Spezifikationen

MoFi Electronics STUDIODAC
Bildquelle - (c) MoFi Electronics

StudioDAC is the first digital-to-analogue converter from MoFi Electronics of Ann Arbor, Michigan, the equipment brand linked to Mobile Fidelity. It was designed in collaboration with Mytek Audio engineer Michal Jurewicz and is made in the USA. Its compact housing follows the look of the StudioPhono phono stage. List price is USD 599 and GBP 749.

Key specs that matter

Conversion uses an ESS ES9038Q2M chip. Digital inputs are USB B, coaxial S/PDIF and optical Toslink. Sampling rates run from 32 kHz to 384 kHz. Over USB the StudioDAC accepts 16 to 32-bit PCM plus DSD64 and DSD128 via DoP, while the coaxial and Toslink inputs take 16 to 24-bit PCM and DSD64. DXD playback is supported, and MQA is decoded and rendered in hardware. Output is one fixed-level RCA pair with 2.5 V RMS at 0 dBFS and an output impedance of 75 ohms. MoFi specifies a frequency response of 20 Hz - 20 kHz (±0.2 dB) and THD+N below 0.002% (20 Hz - 20 kHz). Dynamic range is 115 dB (A-weighted), SNR is above 114 dB (A-weighted), and crosstalk is -110 dB at 10 kHz. Linearity is within ±0.25 dB at -110 dB.

Engineering and use context

A low-noise precision clock generator sets the timing of the converter, and MoFi states that it minimises jitter. Its digital filter is an apodizing type, chosen against pre-ringing artefacts. The USB input is asynchronous USB Audio Class 2 and works with Windows 10 (version 1703) and newer and with macOS 10.6.4 and newer. Inputs are chosen with a selector knob. LED indicators show the incoming format, bit depth and sample rate, and the main indicator changes colour for PCM, MQA, MQA Studio and DSD, so bit-perfect playback can be confirmed. Power comes from an outboard supply for 100-240 V AC mains that delivers +12 V DC at 3.3 A through a 5.5/2.5 mm centre-positive barrel connector. MoFi notes that the external supply leaves room for future upgrades. Units for the EU ship with a 20-minute automatic standby timer, which can be disabled outside the EU.

Pairing

A preamplifier, integrated amplifier or processor with line-level analogue inputs and its own volume control is required. A computer or streamer connects over USB for DSD128 and the highest PCM rates. CD transports and TVs connect over coaxial or optical S/PDIF.

Alternatives

MoFi Electronics has no other standalone DAC, so the StudioDAC is the only model in this category.

Spezifikationen

  • Modellbezeichnung

    STUDIODAC

  • Wandlungstyp

    N/A

  • Wandlerchip

    ESS9038Q2M

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 32 bit / 384 kHz and DSD128

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20 (±0.2 dB)

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000 (±0.2 dB)

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    2.5

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    75

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    >114

  • Klirrfaktor + Rauschen (% at 22 kHz)

    <0.002 (in the 20 Hz – 20 kHz band)

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link