Hifiverse

DACs - PS Audio Stellar DAC

Beschreibung, Bilder, technische Daten und Spezifikationen

PS Audio Stellar DAC
Bildquelle - (c) PS Audio

The Stellar DAC is a full-width digital-to-analogue converter from PS Audio, offered in black or silver. Based on the 32-bit ESS Sabre Hyperstream architecture, it uses the ES9018K2M DAC chip. A built-in digital volume control allows the unit to run in fixed or variable DAC mode, and both balanced XLR and single-ended RCA analogue outputs are provided.

Key specs that matter

Digital inputs comprise two I2S on HDMI connectors (PCM 44.1-384 kHz, DSD64, DSD128 and DSD256), two coaxial and one optical (PCM 44.1-192 kHz) and one asynchronous USB-B (PCM 44.1-384 kHz, DSD64 and DSD128 native or via DoP v1.1). PCM word length is 16 to 32 bit, and DSD256 corresponds to 11.2 MHz. Maximum output level is 4 V RMS balanced and 2 V RMS single-ended, with output impedance of 100 ohms / 200 ohms. Frequency response is 20 Hz - 20 kHz (±0.1 dB) and 10 Hz - 55 kHz (-1 dB). THD+N is below 0.003% (1 kHz, full output), IMD below 0.004% (CCIF, full output), and signal-to-noise ratio is 110 dB referenced to 4 V RMS. The chassis measures 432 x 76 x 305 mm and weighs 10.2 kg. Power consumption is 25 W.

Engineering and use context

The analogue output stage is a Class A configuration, fully balanced and built as a direct coupled hybrid array with no capacitors in the signal path. It is powered by a high-current, oversized analogue power supply.

On the digital side, PS Audio uses its Digital Lens and states that it outputs near-perfect data without jitter. Its two I2S inputs are intended for PS Audio's own transport and connect over an HDMI cable.

Pairing

In variable mode a power amplifier with balanced or single-ended inputs connects directly. In fixed mode a preamplifier or integrated amplifier is required. A PS Audio transport with I2S output connects over HDMI.

Alternatives

The DirectStream DAC MK2 is a higher PS Audio converter.

Spezifikationen

  • Modellbezeichnung

    Stellar DAC

  • Wandlungstyp

    N/A

  • Wandlerchip

    ES9018K2M

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to PCM 32/384 and DSD252

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    55000

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    4

  • Ausgangspegel (unsymmetrisch) (V)

    2

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    200

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    100

  • Analogausgänge

    Variable

  • Signal-Rausch-Abstand (dB)

    110

  • Klirrfaktor + Rauschen (% at 22 kHz)

    0.003

  • Abmessungen (mm)

    431.8 x 76.2 x 304.8

  • Gewicht (kg)

    11.8

  • Offizieller Link