The NADAC D is a DAC and headphone amplifier from Master Fidelity of Vancouver, founded in 2015 as Merging Fidelity Inc., a partner of the Swiss firm Merging Technologies, for which it developed the MERGING+CLOCK and MERGING+POWER. Master Fidelity took its current name after the Sennheiser Group acquired Merging Technologies in 2022. Its design lead is the former recording engineer Weishen Xu. Launched in 2025, the NADAC D costs GBP 25,000, the same as the matching NADAC C master clock.
Key specs that matter
Conversion is true 1-bit. PCM of 44.1 - 96 kHz is upsampled to DSD128 and PCM of 176.4 - 384 kHz to DSD256, without ASRC. On a Neutrik mediaCON socket, the USB Type-C input accepts PCM up to 384 kHz/32-bit and native DSD up to DSD512. AES3, coaxial and TosLink inputs accept up to 192 kHz/24-bit and DoP64. Balanced XLR output is 4 Vrms (+12 dBV) at 200 ohms, and RCA output is 2 Vrms at 100 ohms. Headphone outputs give 300 mW into 32 ohms (4.4 mm) and 100 mW into 32 ohms (6.35 mm). THD+N is 0.0003% (4 Vrms, 1 kHz), SNR is 120 dBA, flatness is ±0.2 dB (10 Hz - 20 kHz) and channel separation is 120 dB. Consumption is 46 W typical, 80 W maximum. It measures 435 x 95 x 390 mm and weighs 9.2 kg.
Engineering and use context
Instead of a commercial DAC IC or an FPGA/CPLD design, Master Fidelity had a dedicated ASIC made, the MF True 1 bit EET D/A ASIC. According to the company, the last chip for 1-bit conversion was the Philips TDA1547 of 1988. Its power reference is oven-controlled and held at constant temperature. Power supply is hybrid - transformer-based for the analogue section, switch-mode with multi-stage linear regulation for the digital section. USB is based on an Amanero interface, and the clock uses two-level frequency synthesis with a 10 MHz BNC input for the NADAC C. For AES and S/PDIF, the ADD-CDR clock data recovery system attenuates jitter down to 1 Hz. An MF Super Isolation Unit built on a custom ASIC reduces jitter to 110 fs. USB internal clock jitter is below 800 fs, and phase error between channels stays below 0.1 degree. Analogue volume has 20 steps of 3 dB and can be bypassed. A 5-inch colour touch screen shows input, filter and warm-up status, six digital filters are selectable, and an infrared remote is supplied. A RAVENNA network input is listed but temporarily unavailable.
Pairing
The matching master clock is the NADAC C. Balanced inputs on a preamplifier or power amplifier match the XLR output.
Alternatives
Master Fidelity has no other DAC in its range.