Hifiverse

DACs - Musetec Audio MH-DA006 Lite

Beschreibung, Bilder, technische Daten und Spezifikationen

Musetec Audio MH-DA006 Lite
Bildquelle - (c) Musetec Audio

Musetec Audio, the Chinese brand whose earlier products carried the L.K.S name, builds the MH-DA006 Lite DAC. It is developed from the flagship MH-DA006 and keeps that model's high-precision multi-clock system and FPGA digital processing. Musetec redesigned the power supply system, the analogue output circuit and some digital algorithms to reduce the selling price, and the Lite is positioned against the older DA004 and DA005. It sells for USD 1,800 with a remote control, a power cable and a two-year warranty.

Key specs that matter

Conversion uses two ESS ES9039PRO DAC chips. The USB input, the IIS-H differential I2S input with adjustable pin sequence and a standard I2S input accept PCM up to 768 kHz and DSD1024. Two coaxial inputs, one AES/EBU input and one optical input accept PCM up to 192 kHz or DoP64. Output level is 2.8 Vrms single-ended (RCA) and 5.6 Vrms balanced (XLR). THD+N is below -117 dB (A-weighted), and dynamic range is above 127 dB. Dimensions are 430 x 320 x 90 mm (W x D x H, including feet), and net weight is 8.3 kg.

Engineering and use context

An FPGA reorganises the input audio data before the DAC chips. Four custom low-noise clocks of different frequencies are installed, and for I2S input the unit offers synchronous and asynchronous clock modes. Its USB interface clock is fully synchronised with the DAC chip, so USB is always decoded in synchronous mode. A high-speed bus isolator sits at the USB port, followed by a USB hub chip and a dedicated low-noise clock for USB data.

Two custom toroidal transformers supply seven groups of AC power. The left channel, the right channel and the digital circuit have separate supplies, with seven first-stage and fourteen second-stage regulated supplies in total. Three LT3045 low-noise regulators, rated at 0.8 uVrms output noise, power the DAC chips and clocks. Rectification uses silicon carbide rectifier diodes and high-speed, high-current Schottky diodes, regulation for the analogue section is all-discrete, and film capacitors are used as bypass filters.

In multi-channel parallel output mode the ES9039PRO delivers a signal current of approximately 60 mA peak. Musetec therefore uses an all-discrete operational amplifier circuit with high-current capability, eight units for the two channels, all in Class A. Every resistor is a 0.1% low-temperature-drift film type, and the electrolytic capacitors are from Mundorf.

Pairing

A streamer or digital transport with I2S output connects to the IIS-H or I2S input. A computer connects to the USB input. The XLR outputs match a preamplifier or integrated amplifier with balanced inputs.

Alternatives

The Musetec MH-DA006 is the flagship DAC with the original power supply and output circuit in a 430 x 380 x 122 mm case weighing 13.9 kg.

Spezifikationen

  • Modellbezeichnung

    MH-DA006 Lite

  • Wandlungstyp

    N/A

  • Wandlerchip

    2 x ES9039PRO

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to PCM768K and DSD1024

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    5.6

  • Ausgangspegel (unsymmetrisch) (V)

    2.8

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    < -117 dB (A-weighted)

  • Klirrfaktor + Rauschen (% at 22 kHz)

    0.00014

  • Abmessungen (mm)

    430 x 320 x 90

  • Gewicht (kg)

    8.3

  • Offizieller Link