Hifiverse

DACs - Luxsin Audio X8

Beschreibung, Bilder, technische Daten und Spezifikationen

Luxsin Audio X8
Bildquelle - (c) Luxsin Audio

The X8 is a desktop DAC and headphone amplifier from Luxsin Audio with eight Cirrus Logic CS43198 DAC chips in a dual-mono parallel architecture, four per channel. Its DSP-based Digital Audio Core runs an AI-assisted parametric EQ that is set by voice or text commands from the mobile app or the PC web interface.

Key specs that matter

USB-B and USB-C audio inputs accept PCM up to 768 kHz/32-bit and native DSD512, as does the I2S input. Coaxial and optical inputs accept PCM up to 192 kHz/24-bit. XLR line output is 4.2 Vrms (1 kHz, 200 kohms), with SNR of 129.5 dB or more, THD+N below -121.8 dB unweighted, channel separation of 133 dB or more and a noise floor below 1.1 µVrms. RCA line output is 2.1 Vrms (1 kHz, 100 kohms), with SNR of 124.5 dB or more and THD+N below -120 dB. Balanced headphone output (4.4 mm and 4-pin XLR) gives at least 4,840 mW + 4,840 mW into 16 ohms, 4,300 mW + 4,300 mW into 32 ohms and 950 mW + 950 mW into 300 ohms in high gain (THD+N below 1%). From the 6.35 mm single-ended output it gives 2,900 mW + 2,900 mW into 16 ohms in high gain. Output impedance is below 1 ohm on both. Dimensions are 236 x 236.8 x 64 mm, weight is 2.75 kg and rated power is 25 W.

Engineering and use context

Left and right channels have independent power supply, circuit layout and signal path. Analogue outputs of the four parallel DACs are summed to reduce noise. A data buffering and distribution circuit keeps all eight DACs in the same reference clock domain. Each CS43198 sits under a custom shielding cover that isolates it from digital circuitry and high-frequency interference. Multiple OPA1612 op-amps and TPA6120A2 high-current drivers make up the headphone amplifier. Luxsin specifies a linear power supply with separately powered digital and analogue circuits and an adjustable 12 V or 15 V analogue rail.

The Digital Audio Core is a dual-core HiFi-5 DSP and ARM STAR architecture with a DSP clock above 500 MHz and large on-chip SRAM. Impedance detection works on the XLR4, 4.4 mm and 6.35 mm outputs and sets the gain automatically, and settings are stored separately for each output. The I2S input supports eight custom pin configurations. Control is by the 102 mm 480 x 960 touchscreen, Android and iOS apps, a web browser or an optional IR remote. Wi-Fi is dual-band 2.4/5 GHz, and Bluetooth 5.1 runs on a Qualcomm chip. Mains input is AC 100-120 V or 220-240 V, 50/60 Hz.

Pairing

The XLR and RCA line outputs connect to a power amplifier or active loudspeakers. Its 3.5 mm 12 V trigger in and out connections allow switching together with other components. The balanced outputs require headphones with a 4.4 mm or 4-pin XLR cable.

Alternatives

The Luxsin X9 is the brand's other DAC and headphone amplifier.

Spezifikationen

  • Modellbezeichnung

    X8

  • Wandlungstyp

    N/A

  • Wandlerchip

    Cirrus Logic CS43198 × 8

  • DSD-Kompatibilität

    Ja

  • Parameter

    PCM 768kHz/32bit and DSD512

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    4.2

  • Ausgangspegel (unsymmetrisch) (V)

    2.1

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    ≥129.5 (XLR), ≥124.5 (RCA)

  • Klirrfaktor + Rauschen (% at 22 kHz)

    N/A

  • Abmessungen (mm)

    236 × 236.8 × 64

  • Gewicht (kg)

    2.75

  • Offizieller Link