The ICEBORNE is a portable USB DAC and headphone amplifier from AFUL, announced on 20 May 2026 at USD 149.99. It is the company's second portable DAC/AMP after the SnowyNight. AFUL describes it as the first portable DAC/AMP with a chassis fully handcrafted from 3D printed resin.
Key specs that matter
Conversion uses two Cirrus Logic CS43198 32-bit DAC chips. PCM is supported up to 32-bit/768 kHz, and DSD is decoded natively up to DSD256. THD+N is below 0.00037%. Noise floor is 1 µV at the 3.5 mm single-ended output and 1.5 µV at the 4.4 mm balanced output. Output power reaches 300 mW per channel into 16 ohms. Its digital input is a USB Type-C port.
Engineering and use context
Each chassis is 3D printed in resin and finished by hand. After printing, the supports are removed manually, the parts are assembled by hand and polished with four grades of sandpaper, and the surface is coated with a low-temperature cured German skin-friendly varnish. Its decoration follows the ice crack pattern of traditional Suzhou garden window lattices. According to AFUL, the resin body runs cool and avoids the heat retention and static shocks of metal dongles.
Inside, AFUL applies what it calls a dual-core tuning process. It combines stage-by-stage suppression of power supply ripple, segmentation of ground loops and manual calibration of thermal noise. On the digital side, the hardware buffers and clock synchronisation protocols of the USB receiver were reworked to reduce data packet drops, jitter and latency. A Type-C to Type-C interconnect made from 6N single-crystal copper with silver plating comes in the box.
Pairing
A host with a USB Type-C port is required. The 3.5 mm single-ended and 4.4 mm balanced outputs accept IEMs and headphones with either termination, and AFUL states compatibility with most IEMs and headphones.
Alternatives
The AFUL SnowyNight is the brand's first portable DAC/AMP, also built on a pair of CS43198 chips.