Hifiverse

DACs - LampizatOr Horizon 2

Beschreibung, Bilder, technische Daten und Spezifikationen

LampizatOr Horizon 2
Bildquelle - (c) LampizatOr

LampizatOr of Poland makes the Horizon 2, a tube DAC announced in September 2026 as the successor to the Horizon 360. It keeps the Horizon chassis, the tube line-up and the output capacitors of the earlier model, while the analogue stage was redesigned over four years of development and several solutions come from the Aphrodite DAC.

Key specs that matter

Conversion runs under firmware control, and the published specification covers PCM up to 768 kHz and DSD512. The digital inputs are USB, coaxial S/PDIF on RCA, AES/EBU, TOSLINK and three I2S inputs on BNC connectors, with a Taiko XDMI input available on request. Analogue sources can be connected through RCA or balanced XLR, and the outputs are RCA, XLR and an additional balanced XLR bypass output. The case measures 440 mm wide, 550 mm deep and 170 mm high without tubes, or 290 mm with them fitted, and the unit weighs 33 kg. Power consumption is 60 VA, and versions are built for 110-115 V, 220-230 V and 240 V mains.

Engineering and use context

LampizatOr uses 6SN7 double triodes in the conversion stage and KT88 beam tetrodes at the output, and rectifies the power supply with tubes as well. After the conversion stage the signal passes through no silicon, there are no op-amps, and the circuit uses neither local nor global feedback. Level is handled by a new version of the company's SuperVolume control, which can be bypassed so that the Horizon 2 feeds an external preamplifier instead of driving a power amplifier directly. The USB receiver is optically isolated and reclocks the data. A new information screen replaces the Nixie display of the previous model, four buttons sit on the front fascia, and the remote handset borrowed from the Aphrodite switches phase, modulator, filter and display, with settings kept in memory. The standard finishes are Matt Black Hole and Silver Sahara, and the removable top plate around the tubes comes in copper, stainless steel, Black Hole, Silver Sahara or translucent red. Owners of the Horizon, Horizon 360 and Horizon 360X can have their units upgraded at the factory from November 2026, covering the digital engine, analogue and preamplifier stages, volume control, firmware, display, front panel and remote.

Pairing

Thanks to the internal level control, the Horizon 2 can drive power amplifiers or active speakers on its own, which makes a separate preamplifier optional. The I2S inputs on BNC suit transports and streamers with a matching interface, while computer sources use the isolated USB input.

Alternatives

Another tube DAC in the LampizatOr range is the Pacific 3.

Spezifikationen

  • Modellbezeichnung

    Horizon 2

  • Wandlungstyp

    N/A

  • Wandlerchip

    N/A

  • DSD-Kompatibilität

    k. A.

  • Parameter

    up to 1520kHz PCM and DSD1024

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (% at 22 kHz)

    N/A

  • Abmessungen (mm)

    440 x 550 x 170

  • Gewicht (kg)

    33

  • Offizieller Link