Hifiverse

DACs - Astell&Kern HC5

Beschreibung, Bilder, technische Daten und Spezifikationen

Astell&Kern HC5
Bildquelle - (c) Astell&Kern

The AK HC5 is a USB DAC cable from Astell&Kern, the first of its kind to use the AK4499EX DAC chip, previously found only in the brand's flagship players. It was first shown on 13 and 14 December 2025 at Potafes in Akihabara and at the Guangzhou headphone show. Sales started in January 2026 at USD 450, GBP 399 or EUR 499.

Key specs that matter

Conversion is split between an AKM AK4191EQ digital processor and an AK4499EX DAC. PCM is accepted from 8 kHz to 768 kHz at 8, 16, 24 or 32 bit, and native DSD from DSD64 to DSD512. Output level is 2.5 Vrms unbalanced and 5 Vrms balanced (no load), with output impedance of 0.5 ohm and 1.1 ohm. Astell&Kern quotes SNR of 121 dB unbalanced and 125 dB balanced, crosstalk of -139 dB and -141 dB, and THD+N of 0.0005% and 0.0004%, all at 1 kHz. IMD SMPTE is 0.0006% and 0.0005%. Frequency response is ±0.006 dB from 20 Hz to 20 kHz and ±0.06 dB from 20 Hz to 70 kHz. Its aluminium body in Satin Silver measures 32 x 64.3 x 16 mm (W x H x D) and weighs about 46 g.

Engineering and use context

Inside, the AK4191EQ and AK4499EX keep digital and analogue signal processing apart. High Driving Mode, developed for the SP4000 player, is carried over, with op-amps in a horizontal layout. A dedicated amplifier stage has high PSRR (Power Supply Rejection Ratio) and CMRR (Common Mode Rejection Ratio). Volume is set by a 150-step wheel using the encoder system of Astell&Kern players, and a 41 mm OLED display shows settings and playback information. Six DAC filters are selectable. DAR (Digital Audio Remaster) upsampling can be switched on to convert 44.1 kHz-family PCM to 352.8 kHz and 48 kHz-family PCM to 384 kHz, or PCM to DSD128 or DSD256.

Each conductor of the attached cable is tin-plated copper, individually insulated with TPE, under an aluminium film shield, a tinned copper braid and a fabric jacket. A polyurethane case made by the Italian specialist Synt3 is available. Roon Tested certification was listed as in progress.

Pairing

A USB Type-C host is required, with UAC 2.0 for phones, tablets and computers and UAC 1.0 for PlayStation and Nintendo Switch consoles. Earphones with a 3.5 mm CTIA 4-pole plug or a 5-pole 4.4 mm balanced plug are supported. When the HC5 is connected to an Astell&Kern player, volume is fixed at maximum on the player side.

Alternatives

The AK HC4 is Astell&Kern's previous USB DAC cable model.

Spezifikationen

  • Modellbezeichnung

    HC5

  • Wandlungstyp

    N/A

  • Wandlerchip

    AK4499EX

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 32 bit / 468 kHz and DSD512

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    121 (unbalanced), 125 (balanced)

  • Klirrfaktor + Rauschen (% at 22 kHz)

    0,0005 (unbalanced), 0,0004 (balanced)

  • Abmessungen (mm)

    64,3 х 32 х 16

  • Gewicht (kg)

    0,046

  • Offizieller Link