The Genesis S2 Streamer DAC combines an Android-based network streamer and a two-chip DAC and belongs to the Genesis range of YBA, the French electronics company. It was launched in mid-2023 at EUR 6,500 in Germany. YBA designed it primarily as a DAC for an external preamplifier or integrated amplifier, with an optional digital volume control for use with power amplifiers or active speakers. The case is black aluminium with a black acrylic front panel.
Key specs that matter
Conversion uses two AKM AK4497EQ DACs. PCM is supported up to 32 bit / 768 kHz, along with DSD512 and MQA 8x for Tidal. Storage is an internal 1 TB NVMe SSD. A 1080 x 1920 touch screen with a 152 mm diagonal sits on the front. Networking is by Ethernet 10/100 Base-T (RJ45) and Wi-Fi 2.4 and 5 GHz (IEEE 802.11b/g/n). Digital inputs are USB DAC, optical, coaxial and two USB ports for drives, plus a Bluetooth 4.2 receiver with LDAC and SBC codecs. Analogue outputs are two RCA pairs and one XLR pair, at 2.25 V (RCA) and 4.5 V (XLR), with SNR of 107 dB and THD+N of 0.0008%. Digital outputs are optical, coaxial, AES/EBU and BNC. Dimensions are 430 x 388 x 115 mm and weight is 9.1 kg.
Engineering and use context
S2 runs on YBA's closed Android platform, developed over three years, with streaming services, USB drive playback, DLNA, AirPlay, NAS and Bluetooth. All of these run through YBA's Android Global Lossless Output (AGLO) system. Supported services are Apple Music, Amazon Music, Spotify, Tidal, Qobuz and Deezer, and file formats are AIFF, WAV (LPCM), FLAC, MP3, WMA and AAC.
Around the AK4497EQ pair, YBA uses its own low-pass filtering and in-house FPGA technology with KDS crystal oscillators and Panasonic capacitors. The DACs are shielded and isolated from the Android section, and each section has an independent power supply - a UI transformer for the DAC section and a switching power supply for the Android section. Six digital filters are selectable, and a fixed output sampling rate from 48 kHz up to DSD256 can be set instead of bypass.
YBA recommends the SSD as the main storage during playback. Files are copied to it from USB drives, or the SSD is removed and connected directly to a computer. Control is by the touch screen or by the Eddict Player app for iOS and Android, which also offers screen mirroring. On Windows the USB DAC input requires a driver, and a Mac needs none.
Pairing
In Line-Out mode, a preamplifier or integrated amplifier with RCA or XLR inputs is required. With the Pre-amplifier output selected, a power amplifier or active speakers connect directly. The four digital outputs allow a separate DAC to be used.
Alternatives
The YBA Heritage D100 is a DAC with a Texas Instruments PCM1795 converter, fixed 32 bit / 192 kHz upsampling and a 5 kg aluminium case.