Hifiverse

DACs - Unitra DSH-805

Beschreibung, Bilder, technische Daten und Spezifikationen

Unitra DSH-805
Bildquelle - (c) Unitra

The DSH-805 is a DAC from Unitra, designed and engineered in Poland as the digital complement to the brand's analogue WSH-805 integrated amplifier. It is listed at EUR 2,399 including VAT, in silver or black. Unitra tested the converter drawing on the experience of the Takt vinyl pressing plant, where digital signals are converted into analogue media every day.

Key specs that matter

The converter is the ESS SABRE ES9039MSPRO with Hyperstream IV architecture, using four DAC channels per audio channel. Digital inputs are USB1, USB2, COAX1, COAX2, optical and AES/EBU. Both USB inputs accept PCM up to 32-bit/768 kHz, DSD512 native and DSD256 as DoP. Coaxial, optical and AES/EBU accept PCM up to 24-bit/192 kHz and DSD64 as DoP. A full MQA decoder and renderer covers MQA and MQA Studio. Outputs are gold-plated RCA and balanced XLR, each rated at 2.3 V RMS. Frequency response is 1 Hz - 20 kHz (±0.1 dB) and 1 Hz - 65 kHz (±1 dB). THD+N is 0.001% from XLR and 0.00015% from RCA (1 kHz, 0 dBFS). Signal-to-noise ratio is above 125 dB (1 kHz, 0 dBFS), and channel separation is above 126 dB. Dimensions are 440 x 369 x 65 mm, weight is 5.81 kg.

Engineering and use context

Seven PCM digital filters are selectable. Every digital input is clocked by the internal master clock, and Unitra states that this clock dynamically selects the optimal frequency for the active stream. Both USB inputs have galvanic isolation, and USB is the connection the manufacturer recommends. OFS-mode MQA streams already decoded by an external streamer are also accepted.

Its analogue output section is a proprietary design with 18 OPA161x operational amplifiers. Power comes from a linear supply whose transformer was designed and wound in Poland for this unit. EMI filtering is included, and five independent secondary voltages with separate linear power stages isolate the digital and analogue sections.

A metal enclosure carries a brushed aluminium front panel. On the front, an LED matrix shows the active source, the selected filter and the signal parameters - sample rate, format, MQA and DSD.

Pairing

The matching amplifier is the WSH-805. An amplifier or preamplifier with balanced XLR or RCA line inputs is required. A computer connects to one of the isolated USB inputs.

Alternatives

Unitra has no other DAC, and the DSH-805 is the only model in its range of digital-to-analogue converters.

Spezifikationen

  • Modellbezeichnung

    DSH-805

  • Wandlungstyp

    N/A

  • Wandlerchip

    8 x ESS SABRE ES9039MSPRO

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to PCM 32/768 and DSD512

  • Untere Grenzfrequenz +/- 3dB (Hz)

    1

  • Obere Grenzfrequenz +/- 3dB (Hz)

    65000

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    2.3

  • Ausgangspegel (unsymmetrisch) (V)

    2.3

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    125 - 126

  • Klirrfaktor + Rauschen (% at 22 kHz)

    0.001 - 0.00015

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link