Hifiverse

DACs - APL HIFI DSD-GR

Beschreibung, Bilder, technische Daten und Spezifikationen

APL HIFI DSD-GR
Bildquelle - (c) APL HIFI

The DSD-GR is a pure DSD digital to analog converter with a balanced, transformer-coupled tube output stage from APL Hi-Fi, or Alex Peychev Laboratories, of Ruse, Bulgaria. Alex Peychev founded the company in 1988 after several years as a lead engineer at the Sony Broadcast and Professional Group, and every APL DAC is DSD-based. GR stands for Galactic Reference, and APL calls the DSD-GR its top-line DAC. It was announced on 15 December 2022, and the Australian retail price was AUD 121,950. Silver and black finishes are offered.

Key specs that matter

Digital inputs are two RCA coaxial, one AES/EBU and one TOSLINK optical, all accepting PCM up to 192 kHz/24-bit. The USB input accepts PCM up to 384 kHz/32-bit, DSD128 in DoP and DSD512 in native DSD format, in both the 44.1 kHz and 48 kHz families. Two DTR inputs use the balanced I2S protocol for the DTR-MR digital transport and the DNP-SR network player. Outputs are single-ended RCA and balanced XLR with Furutech rhodium-plated connectors, selected by a rear switch and not usable at the same time. Output level is 2.5 V RMS at 0 dBFS, and output impedance is approximately 100 ohms. Power input is 115 V or 230 V, 50/60 Hz, factory pre-set. Dimensions are 450 x 120 x 380 mm (W x H x D), or 140 mm high with feet, and weight is 24.5 kg.

Engineering and use context

A proprietary 64-bit PCM to DSD converter module offers DSD256 and DSD512, user selectable from the remote control. For PCM there are proprietary 64-bit Normal and Slow linear phase filters, plus a zero filter non-oversampling (NOS) mode. Conversion is pure DSD with no additional digital processing, in a proprietary module with non-magnetic resistors. Its clocks are ultra-low phase noise femto-jitter master clocks.

Current to voltage conversion and DSD analog filtering are entirely passive. The pure class A differential output stage uses ECC99 tubes and custom Lundahl interstage and output transformers with oxygen-free copper windings. It has zero negative feedback, no op amps and no mechanical switches or relays in the signal path. The power supply uses an oversized custom R-Core balanced transformer, a Lundahl choke for the tube supply and a delayed high-voltage supply that starts after tube warm-up. A Noritake FLD display with red, blue or green filters sits in an all-aluminium enclosure with a 20 mm machined front panel. APL states that the modular design allows future upgrades of any internal stage.

Pairing

The DTR inputs connect the APL DTR-MR transport and DNP-SR player. A preamplifier or amplifier with volume control is required.

Alternatives

The APL Hi-Fi DSD-WR is the all-solid-state reference DAC of the range, with a transformer-coupled class A output stage.

Spezifikationen

  • Modellbezeichnung

    DSD-GR

  • Wandlungstyp

    N/A

  • Wandlerchip

    Pure DSD Digital to Analog conversion module using non-magnetic resistors

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to PCM 32/384 and DSD512

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    2.5

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    100

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (% at 22 kHz)

    N/A

  • Abmessungen (mm)

    450 x 120 x 380

  • Gewicht (kg)

    24.5

  • Offizieller Link