The DC-1000 is a D/A converter from Accuphase of Japan, which the company calls a Precision MDSD digital processor. Accuphase introduced it to mark 50 years of manufacturing. Together with the DP-1000 SACD/CD transport it forms the fifth-generation Accuphase separate SACD/CD system, renewed from the DP/DC-950 of 2016. The European price was about EUR 28,000.
Key specs that matter
Conversion uses one ESS ES9038PRO per channel, with its eight converters driven in parallel - 8MDS++ for PCM and 8MDSD for DSD. Digital inputs are HS-LINK (Ver. 1 and Ver. 2), USB, two optical, three coaxial and one balanced. USB accepts PCM from 44.1 to 384 kHz at 16 to 32-bit and DSD at 2.8, 5.6 and 11.2 MHz (11.2 MHz via ASIO only). Analogue outputs are balanced XLR and line RCA, both 2.5 V at 50 ohms, and optical and coaxial digital outputs are provided for recording. Frequency response is 0.5 Hz - 50 kHz (+0, -3.0 dB). THD+N is 0.0004% (20 Hz - 20 kHz), signal-to-noise ratio is 123 dB, dynamic range is 121 dB and channel separation is 120 dB. Dimensions are 477 x 156 x 394 mm (W x H x D), and weight is 24.4 kg.
Engineering and use context
In MDS++ (Multiple Delta Sigma) the same digital signal is supplied to each converter and the outputs are combined. Signal values add up while conversion error and noise cancel, and Accuphase gives the improvement as the square root of the number of converters, a factor of 2.8 here. As the output current is very large, the DC-1000 uses four I-V converters at each of the plus and minus outputs instead of one, with ANCC feedforward noise and distortion cancelling. Its DAC chip and I-V converters share one PCB. MDSD (Multiple Double Speed DSD) generates eight phase-shifted DSD signals with half-clock delays, so the converter array works as a linear-phase moving-average filter without conversion to PCM.
A fully balanced post-filter gives a fifth-order low-pass filter in total. Its final stage is the new Dual Direct Balanced Filter, two Direct Balanced Filters in parallel with separate line and balanced paths, used first in the DC-1000. Filter boards are glass cloth fluorocarbon resin with low dielectric constant and minimum loss. Analogue and digital circuits have separate toroidal transformers and low-noise supplies. Front-panel controls include output level adjustment, and a phase selector inverts the balanced output. The natural-grain wood case has a mirror finish and sits on an 8 mm machined aluminium bottom plate with high-carbon cast iron insulators. An ASL-10B audio cable is supplied.
Pairing
The matching transport is the DP-1000, connected over HS-LINK. A preamplifier with balanced XLR or RCA line inputs is required.
Alternatives
The Accuphase DC-950 is the earlier converter that the DC-1000 replaced.