The Weiss Engineering DAC502 is a D/A converter with built-in signal processing that also works as a preamplifier, a headphone amplifier and a UPnP and Roon Ready network streamer. It belongs to the Swiss company's Series 5 together with the half-size DAC501 and the DSP501 and DSP502 processors. Weiss uses the same algorithms in its professional audio tools for studios. A standard two-channel DAC502 can be upgraded to the later MK2 version, and the unit comes in silver or black.
Key specs that matter
Conversion uses dual 32-bit over-sampling multi-bit sigma-delta converter chips, two per audio channel. Five digital inputs are provided on XLR, RCA, Toslink, USB B and RJ45 Ethernet. USB and Ethernet accept 44.1 to 384 kHz and DSD64 and DSD128, the AES/EBU and S/PDIF inputs accept up to 192 kHz, and Toslink up to 96 kHz. Maximum output is 6.8 Vrms (+18.9 dBu) balanced and 3.4 Vrms (+12.9 dBu) unbalanced. Frequency response is 0 Hz - 20 kHz (±0.25 dB, Fs 44.1 kHz), THD+N is -111 dBr at -3 dBFS, and crosstalk is better than 110 dB (20 Hz - 20 kHz). The chassis measures 450 x 66 x 300 mm (W x H x D), and weight is about 5 kg.
Engineering and use context
An internal high-precision, low-jitter clock generator clocks the D/A section for the USB and Ethernet inputs. Both line and headphone outputs use discrete output stages, the line outputs are DC-coupled with no servo mechanisms, and line and headphone levels are set independently in four coarse steps. Headphone outputs are a 6.3 mm jack on the front and a 4-pin XLR at the back.
Signal processing includes a three-band parametric EQ for tone control, de-essing, constant volume, vinyl emulation, crosstalk cancelling for loudspeaker playback, loudness control, headphone EQ and crossfeed. Control is by a colour touch screen with a rotary encoder, an IR remote and a web browser. Power comes from a non-switching supply with two toroidal mains transformers and separate regulators for the left and right channels. Mains voltage is selected automatically, and a semiconductor relay switches the unit on or off only at zero crossings of the mains voltage. Maximum consumption is 25 VA.
Pairing
Power amplifiers with balanced or unbalanced inputs connect directly. For headphones of 200 ohms or more the 0 dB level setting is used, and low-impedance models down to 4 ohms require the -30 dB step.
Alternatives
The Weiss DAC501 is the compact version with the same electronics in a half-width enclosure.