Hifiverse

DACs - Canor Audio DAC 2.10

Beschreibung, Bilder, technische Daten und Spezifikationen

Canor Audio DAC 2.10
Bildquelle - (c) Canor Audio

The DAC 2.10 is a digital-to-analogue converter with a tube output stage in Canor's Performance Line. It plays PCM up to 768 kHz and DSD up to native DSD512 over USB, has USB, optical, coaxial and AES/EBU inputs and analogue RCA and XLR outputs, and comes in a silver-coloured housing. Recommended retail price is EUR 3,849.

Key specs that matter

Conversion uses two ESS9038Q2M 32-bit DACs in dual mono. Sampling rates are 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 705.6 and 768 kHz. DSD support covers DSD64, DSD128, DSD256 and DSD512 (DoP, DSD512 native), with full MQA unfolding in hardware. Frequency response is 20 Hz - 20 kHz (±0.03 dB, Fs 192 kHz). Output voltage (0 dBFS) is 2 V on RCA and 4 V on XLR, and output impedance is below 200 ohms. THD is 0.008% at 0 dBFS and 0.004% at -6 dBFS, and signal-to-noise ratio is 95 dB (RCA) and 108 dB (XLR). Digital inputs are one USB Audio Class 2 (USB B), two Toslink optical, one coaxial RCA and one AES/EBU on XLR, the last three up to 24-bit/192 kHz. Analogue outputs are two XLR and one RCA. It measures 435 x 120 x 405 mm (W x H x D), weighs 12 kg and draws 44 W (230 V/50 Hz).

Engineering and use context

Signal paths are consistently symmetrical, and the right and left channels have separate signal paths to the two DACs. Its output buffer is a balanced tube stage with four 6922EH tubes. USB data transfer is asynchronous, with PCM up to 24-bit/768 kHz and DSD via DoP up to DSD512. An XMOS microcontroller with multi-core RISC architecture receives the digital input signals.

Seven digital filters are available for PCM, plus a proprietary MQA filter that is set automatically during MQA playback. An Oversampling Bypass mode in the filter menu switches off all digital filtering. A 3.5-inch TFT display (480 x 320 px) with adjustable brightness is on the front panel.

Pairing

A preamplifier or integrated amplifier with balanced XLR inputs is required for the 4 V output. The RCA output connects to single-ended line inputs. A computer connects over USB 2.0, and CD transports and streamers connect to the optical, coaxial or AES/EBU inputs.

Alternatives

The Verto D3 is Canor's other DAC in the Performance Line.

Spezifikationen

  • Modellbezeichnung

    DAC 2.10

  • Wandlungstyp

    N/A

  • Wandlerchip

    2 x ESS9038Q2M

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 32 bit / 768 kHz and DSD512

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    4

  • Ausgangspegel (unsymmetrisch) (V)

    2

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    200

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    200

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (% at 22 kHz)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link