Hifiverse

DACs - T+A DAC 200

Beschreibung, Bilder, technische Daten und Spezifikationen

T+A DAC 200
Bildquelle - (c) T+A

The DAC 200 is a D/A converter and pre-amplifier from Series 200 of T+A elektroakustik in Herford, Germany. It was announced on 24 September 2021 together with the MP 200 player and the A 200 power amplifier, at EUR 5,490, USD 6,900 or GBP 4,990, and its styling refers back to the T+A M series of 1993.

Key specs that matter

PCM conversion uses a Double-Differential-Quadruple-Converter with four 32-bit sigma-delta D/A converters per channel at 705.6 or 768 kSps. DSD goes to a T+A True 1-Bit converter up to DSD1024 (49.2 MHz) as native bitstream. Two asynchronous USB DAC inputs accept 44.1 - 768 kSps PCM and DSD up to DSD1024, with DoP up to DSD256. Other digital inputs are AES/EBU, BNC, two coaxial and two Toslink, all 32 - 192 kHz at 16 - 24 bit. Analogue outputs are XLR at 0 - 5.0 V and RCA at 0 - 2.5 V, both 22 ohms, fixed or variable. Frequency response is 0.1 Hz - 200 kHz (+0/-3 dB), signal-to-noise ratio 110/114 dB, THD and intermodulation below 0.001 % and channel separation above 108 dB. Dimensions are 100 x 320 x 340 mm (H x W x D), and weight is 6.2 kg.

Engineering and use context

T+A calls its split of the two formats Path Separation Technology - PCM and DSD each have their own converter, and DSD is never converted to PCM. The PCM board carries eight 32-bit Burr-Brown converters in a double symmetrical circuit. Upsampling is synchronous, with FIR short, FIR long, Bezier/IIR, Bezier and NOS filters, followed by a third-order phase-linear Bessel analogue filter switchable at 60 or 120 kHz.

Incoming signals pass the T+A De-Jitter Masterclock, where a second PLL stage reduces residual jitter by a factor of 4, and femto-clock oscillators are reserved one per clock family, 44.1 kHz and 48 kHz. In the Digital Analogue Separation System (DASS), Silicon Labs digital isolators separate the digital and analogue sections galvanically, and their mains sections are separated as well. The USB inputs use a Thesycon chip.

Its pre-amplifier section is discrete Class A, with a double mono HV output stage and gold contact relays for volume in 1 dB steps from -90 to 0 dB. A discrete 4.4 mm Pentaconn headphone output runs in Class A up to 200 mA at 6 ohms output impedance. One RCA analogue input (10 kohms) is standard, and an optional board adds two HDMI inputs and an HDMI output with ARC. The SYS IN input carries SYS Link within Series 200, and the unit is Roon Tested. Finishes are silver or black anodised aluminium.

Pairing

Its variable outputs allow direct connection to a power amplifier. The matching power amplifiers are the A 200 stereo and M 200 mono models. Headphones need a 4.4 mm Pentaconn cable.

Alternatives

The DAC 8 DSD is an earlier T+A D/A converter with a Quadruple PCM converter and True 1-Bit DSD conversion up to DSD512.

Spezifikationen

  • Modellbezeichnung

    DAC 200

  • Wandlungstyp

    N/A

  • Wandlerchip

    N/A

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 32 bit / 768 kHz and DSD 1024

  • Untere Grenzfrequenz +/- 3dB (Hz)

    0.1

  • Obere Grenzfrequenz +/- 3dB (Hz)

    200 000

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    110/114

  • Klirrfaktor + Rauschen (% at 22 kHz)

    < 0,001

  • Abmessungen (mm)

    100 × 320 × 340

  • Gewicht (kg)

    6.3

  • Offizieller Link