Hifiverse

DACs - Audiolab D7

Beschreibung, Bilder, technische Daten und Spezifikationen

Audiolab D7
Bildquelle - (c) Audiolab

The D7 is a compact tabletop DAC from Audiolab of the UK. It comes from the M-DAC lineage, draws heavily on the 7000A amplifier and is styled to match the 6000 and 7000 series. Besides the DAC it has a headphone amplifier, a USB drive input and Bluetooth reception. Black and Silver finishes are offered.

Key specs that matter

The converter is the ESS ES9038Q2M 32-bit DAC. Over the USB B input it accepts PCM from 44.1 to 768 kHz and DSD64, DSD128, DSD256 and DSD512. Both optical and coaxial inputs run from 44.1 to 192 kHz, and the USB HDD input up to 96 kHz. Output level (0 dBFS, 1 kHz) is 2.05 Vrms on RCA and 4.1 Vrms on XLR, with an output impedance of 120 ohms. Frequency response is 20 Hz - 20 kHz (±0.2 dB) and THD is below 0.001%. Signal-to-noise ratio is above 115 dB on RCA and above 117 dB on XLR (A-weighted). The headphone amplifier has an output impedance of 2.35 ohms and takes loads of 20 - 600 ohms, with THD below 0.01% (1 kHz, 50 mW). Dimensions are 180 x 56 x 208 mm (W x H x D), and net weight is 1.42 kg.

Engineering and use context

The Sabre chip uses the ESS HyperStream II architecture and the Time Domain Jitter Eliminator. Incoming audio can be upsampled to 352.8 or 384 kHz on request. Five DAC reconstruction filter settings are available.

On the rear panel are two coaxial and two optical S/PDIF inputs, a USB B input for computers, phones and tablets, and a USB A port for flash drives with MP3, WMA, APE, AAC, WAV and FLAC files. Bluetooth 5.1 supports aptX and aptX HD. Analogue outputs are RCA and fully balanced XLR, and digital coaxial and optical outputs are provided too. Two 12 V trigger outputs complete the rear panel.

Its headphone amplifier is a dedicated current-feedback design. Operation runs through an OLED display with a menu, front controls and a full remote control. The chassis is aluminium, firmware is upgraded over USB, and power comes from an external adapter supplied with the unit. Standby consumption is below 0.5 W.

Pairing

An amplifier or powered speakers with an RCA or balanced XLR line input is required. Headphones within the rated load range connect to the headphone output. A computer with USB output is needed for the 768 kHz and DSD512 formats.

Alternatives

The M-DAC+ is the earlier Audiolab DAC of the M-DAC line.

Spezifikationen

  • Modellbezeichnung

    D7

  • Wandlungstyp

    N/A

  • Wandlerchip

    ES9038Q2M

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 32 bit / 768 kHz and DSD512

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    120

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    120

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    115 (RCA), 117 (XLR)

  • Klirrfaktor + Rauschen (% at 22 kHz)

    < 0.001%

  • Abmessungen (mm)

    180 x 208 x 56

  • Gewicht (kg)

    1.42

  • Offizieller Link