Hifiverse

DACs - Mytek Brooklyn DAC

Beschreibung, Bilder, technische Daten und Spezifikationen

Mytek Brooklyn DAC
Bildquelle - (c) Mytek

The Brooklyn DAC is a half-width digital-to-analogue converter from Mytek, a company that designs its products in New York and builds them in Poland. Mytek describes it primarily as a reference USB2 DAC that is also a line and phono analogue preamplifier and a headphone amplifier. Its original US price was USD 1,995, and it was offered in silver or black.

Key specs that matter

Conversion uses a Sabre 9018 Pro chipset, with PCM up to 384 kHz/32 bit, native DSD up to DSD256 and DXD, and 128 dB dynamic range. A certified hardware MQA decoder is built in. Digital inputs are USB2 Class 2, AES/EBU, two S/PDIF, Toslink/ADAT and SDIF3 for DSD up to DSD256. AES/EBU, S/PDIF and Toslink accept PCM up to 192 kHz and DSD64 via DoP. Analogue outputs are RCA and balanced XLR, both active at once, at 50 ohms output impedance. The headphone amplifier is rated at 500 mA and 6 W, with two headphone jacks. Dimensions are 216 x 216 x 44 mm (W x D x H), and weight is 2 kg.

Engineering and use context

Its analogue preamplifier section has one relay-controlled input that switches between line level and MM or MC phono. Mytek offers three level control options - a 1 dB step analogue attenuator with separate settings for the main outputs and the headphones, a 32-bit digital attenuator in 1 dB steps, and a relay bypass for fixed-level output.

Clocking comes from the Mytek Femtoclock Generator, specified at 0.82 ps internal jitter. Wordclock input and output allow several units to be stacked for multichannel operation, multichannel DSD included. Over USB2 the Brooklyn DAC also works as an audio interface, and all digital inputs can be routed into a computer. USB playback is driverless on macOS and Linux for all formats.

An optional 12 V DC input accepts an external power supply or a battery. Firmware is upgraded over USB through the Mytek Control Panel. A remote control is included, and the unit also accepts a universal remote. Mytek gives a two-year warranty.

Pairing

With variable-level XLR and RCA outputs it drives a power amplifier or active monitors directly, and in bypass mode it connects to the line input of an integrated amplifier. A turntable with an MM or MC cartridge connects to the phono input.

Alternatives

The Manhattan DAC II is the higher Mytek DAC in the Manhattan line.

Spezifikationen

  • Modellbezeichnung

    Brooklyn DAC

  • Wandlungstyp

    N/A

  • Wandlerchip

    Sabre 9018 Pro

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 32bit / 384 kHz and DSD256

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (% at 22 kHz)

    N/A

  • Abmessungen (mm)

    216 x 216 x 44

  • Gewicht (kg)

    2

  • Offizieller Link