Hifiverse

DACs - Ayon Audio Ayon Kronos

Beschreibung, Bilder, technische Daten und Spezifikationen

Ayon Audio Ayon Kronos
Bildquelle - (c) Ayon Audio

The Kronos is a tube digital-to-analogue converter from Ayon Audio of Austria and the only standalone DAC in the company's current catalogue. Ayon prepares it for computer playback and for general DSD professional audio use. It is built on a modular platform in three versions - the Kronos XS, the Kronos Signature and a top-level third version - and each unit can be upgraded at any time. US list prices were USD 7,995 for the XS, USD 14,945 for the Signature and USD 16,900 for the top-level version.

Key specs that matter

Conversion rate is up to 768 kHz/32-bit and DSD256, with a fully symmetrical DAC configuration on AKM chips. A PCM to DSD conversion DSP module is available as an option. Dynamic range and signal-to-noise ratio are both above 120 dB. Frequency response is 20 Hz - 50 kHz (±0.3 dB), and THD is below 0.001% at 1 kHz. Output level is 2.6 V fixed or 0 - 2.5 V rms variable on RCA, and 5.2 V fixed or 0 - 5 V rms variable on XLR. Output impedance is about 300 ohms on both. Digital inputs are S/PDIF (RCA), AES/EBU (XLR), I2S, TosLink, BNC, USB and 3 x BNC for DSD, plus one 75 ohm S/PDIF (RCA) digital output. Dimensions are 48 x 39 x 13 cm (W x D x H), and weight is 15 kg.

Engineering and use context

Its output stage is a class A triode tube stage for single-ended and balanced operation that uses the 6H30/5687, with a separate analogue output stage for each channel. Ayon specifies 0 dB negative feedback of any kind and no solid-state devices, followers, buffers or DC servo in the tube output signal path. Volume is controlled in the analogue domain, and an ultra-low-jitter internal clock generator is used.

Inside are two separate R-core low-noise transformers, one for the digital and one for the analogue section. A GZ30 tube rectifier and choke filtering supply the analogue output stage, with regulated DC filament supplies and soft start. An AC line filter, 10 separate voltage regulators and isolated supplies for each stage complete the power supply. Parts include MKP 1% capacitors, tube sockets with gold pins and a gold-plated PCB. The non-magnetic brushed anodised aluminium chassis is assembled by hand, in black or chrome, and sits on resonance-absorbing aluminium feet.

Pairing

The variable outputs can drive a power amplifier directly. Ayon specifies the low output impedance for long interconnect runs to tube or solid-state power amplifiers. A remote control is included.

Alternatives

Ayon Audio lists no other standalone DAC, so the three versions of the Kronos are the choice within the brand.

Spezifikationen

  • Modellbezeichnung

    Ayon Kronos

  • Wandlungstyp

    N/A

  • Wandlerchip

    N/A

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 768kHz / 32 bit & DSD 256

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    5.2

  • Ausgangspegel (unsymmetrisch) (V)

    2.6

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    300

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    300

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    >120

  • Klirrfaktor + Rauschen (% at 22 kHz)

    < 0.001 (at 1 kHz)

  • Abmessungen (mm)

    480 x 390 x 130

  • Gewicht (kg)

    15

  • Offizieller Link