The Z-3 is a network transport from Soulnote of Japan and the flagship of its network products. Soulnote developed it to maximise the capability of ZERO LINK, the digital link it designed jointly with SFORZATO. It has no disc drive and is a certified Roon Ready device, receiving the RAAT stream from a Roon core over the network. Silver and black finishes are offered.
Key specs that matter
Inputs are SFP and USB, outputs are ZERO LINK and USB. PCM is supported up to 768 kHz at 16, 24 and 32 bit in AIFF, WAV, FLAC, Apple Lossless, MP3 and AAC, and DSD up to 22.6 MHz in DSF and DFF. Power supply is 220 V AC 50 Hz (Z-3H) or 115 V AC 60 Hz (Z-3T), with a consumption of 30 W. Maximum external dimensions are 454 x 174 x 393 mm (W x H x D) and weight is 20 kg. Included accessories are a spike board (474 x 20 x 413 mm), spikes, a ZERO LINK cable and a power cable.
Engineering and use context
ZERO LINK replaces every asynchronous component, so that only clock-defined signals are transmitted to the D/A converter. When ZERO LINK is connected, the master clock of the D/A converter is transmitted over the link and used in the I2S generation circuit, and Non-PLL Sync is applied. An SC cut OCXO with ultra-low phase noise is installed as the clock of the dedicated SFP circuit.
On the network side, the SFP port accepts an optical link module for optical cable or an SFP RJ45 module for a standard LAN cable. Neither module nor the cables come with the unit.
Its power supply uses the same digital high-regulation transformer as the D-3 DAC, a 260 VA type. Four non-NFB discrete supply circuits are taken from separate windings, with 16 SiC rectifier diodes and 70 low-magnification electrolytic capacitors in total. Soulnote applies its non-rigid housing to the AC inlet, I/O terminals, circuit boards and board chassis, and uses titanium washers and spikes placed directly under the transformers.
Three operating modes are possible. With LAN input and ZERO LINK output it connects to the D-3 or S-3 Reference, and the LAN input supports DLNA, OpenHome and diretta. With USB input and ZERO LINK output it works as a ZERO LINK bridge, and the USB input supports Bulk Pet and JPLAY. With LAN input and USB output it is a network transport for a USB DAC. USB input to USB output is not possible.
Pairing
ZERO LINK playback requires the Soulnote D-3 DAC or the S-3 Reference SACD player. Any other DAC connects over USB. A Roon core, a network library or a computer on the USB input is required as the source.
Alternatives
Soulnote has no other network transport in its range.