The Signature CD player is a top-loading compact disc player from YBA, the French company founded in 1981. It belongs to the Signature range together with the Signature PRE-Amplifier MKII and the Signature Stereo and Mono power amplifiers. YBA states that Yves-Bernard André personally auditions every Signature CD player during production. Each unit comes with a certificate signed by him, and his signature also appears inside the machine.
Key specs that matter
Drive system is a Philips CD-PRO M mechanism with YBA's patented Blue Diode design, compatible with CD, CD-R and CD-RW discs. Outputs are one RCA pair at 2.3 V, one XLR pair at 4.6 V and one coaxial digital output. Signal-to-noise ratio is 115 dB (RCA) and 120 dB (XLR), frequency response is 20 Hz - 20 kHz (-0.5 dB) and THD+N is 0.0015% (20 Hz - 20 kHz). Power comes from a linear supply with a 190 VA UI-Core transformer and 94,000 µF of analogue power capacitors. Standby consumption is below 0.5 W. Dimensions are 430 x 370 x 151 mm (W x D x H) and weight is 30.5 kg.
Engineering and use context
YBA uses a totally symmetrical design in this player, with only active components in the signal path and no passive components. Its case is made from machined aluminium in a natural aluminium finish.
Loading is from above through a sliding door. A disc clamp is placed on the disc on the platter, and playback starts when the door is slid forward by about 20 mm.
Mains power is switched on the rear panel. In the centre of the embossed YBA logo on the front sits a thermosensitive standby switch that responds to the touch of a finger. Two selector switches are on the left side, the first for play, pause and stop, the second for previous and next track. The YBA remote control selects between AMP, CD and AUX devices and adds random play, repeat of one track or all tracks and a display that can be dimmed or switched off.
On the rear panel, the XLR sockets carry ground on pin 1, the hot (in-phase) signal on pin 2 and the cold signal on pin 3. YBA specifies the coaxial output for an external DAC or a digital recorder.
Pairing
An amplifier or preamplifier with balanced XLR inputs is required for the 4.6 V output. The matching preamplifier is the Signature PRE-Amplifier MKII. Via the coaxial digital output, an outboard DAC can be used.
Alternatives
The YBA Genesis CD4 is a CD player with a Sanyo HD850 mechanism, a Cirrus Logic CS4398 DAC and a 160 VA UI-Core transformer in an 11 kg case.