The PL20 is a compact CD player from SMSL that also rips discs to a USB flash drive, plays files from that drive and works as a two-way Bluetooth device. It was introduced at USD 200 as an update of the PL100, which had a single CS43131 chip, no Bluetooth output and no 4.4 mm socket. The CNC-machined all-aluminium shell comes in silver or black.
Key specs that matter
Conversion uses two Cirrus Logic CS43131 DAC chips. Disc formats are CD-DA, CD-ROM, CD-R, CD-RW, CD-DSD and MP3 on 12 cm discs, loaded through a slot. USB flash-drive playback covers DSD64 (DFF/DSF), WAV, FLAC, APE, WMA and MP3, from drives formatted FAT32, exFAT or NTFS (read-only). Bluetooth is version 5.3, bidirectional. Outputs are RCA line, optical, coaxial and 3.5 mm and 4.4 mm balanced headphone jacks. Headphone output power is 160 mW (4.4 mm) and 40 mW (3.5 mm) into 32 ohms. THD+N is 0.0012% and SNR is 98 dB. Power consumption is below 3.5 W, and below 0.1 W in standby. Dimensions are 166.3 x 49.5 x 209.3 mm (W x H x D), and weight is 1.39 kg.
Engineering and use context
Ripping starts with a two-second press of the RIP key or with the RIP button on the remote. The PL20 then rips the audio tracks of the disc into lossless WAV files on a USB flash drive, using low-speed extraction, and one CD takes about 10 to 15 minutes. Ripping to drives formatted NTFS is not supported. Track names can be edited afterwards on a phone or computer, or ID3 data can be matched by importing the files into a local network player.
A front-panel key switches between CD, USB and Bluetooth receiver modes, and a long press starts Bluetooth transmission. As a receiver it pairs with a phone under the name CD player, while in transmit mode it connects to Bluetooth speakers and headphones. The RCA, headphone and Bluetooth outputs carry the signal at the same time, with no output selection.
Discs of 8 cm are not supported. Power comes through a USB-C input rated 5 V/2 A, and the box contains a USB cable, a full-function remote control and the manual, but no power adapter. Input and output terminals are gold-plated.
Pairing
A separate USB power adapter is required. The RCA output connects to an amplifier or active speakers. Its optical and coaxial outputs connect to an external DAC or a digital power amplifier.
Alternatives
The PL100 is the earlier SMSL desktop CD player.