The MCD350 is a 2-channel SACD/CD player from McIntosh Laboratory. It plays Redbook CD and hybrid SACD discs, most CD-R, CD-RW and DualDiscs, and MP3 or WMA files on discs written to the ISO9660 Level 1 standard. The front carries the McIntosh illuminated glass front panel with LED illumination and a display that indicates the current playback status.
Key specs that matter
Fixed output level is 2.0 Vrms unbalanced and 4.0 Vrms balanced, with an output impedance of 600 ohms on both. Frequency response is 4 Hz - 40 kHz (+0.5/-2 dB) for SACD and 4 Hz - 20 kHz (±0.5 dB) for CD. Signal-to-noise ratio is better than 108 dB (A-weighted) and dynamic range is better than 100 dB. Harmonic distortion is 0.003% for SACD and 0.002% for CD, both at 1 kHz. Channel separation is better than 98 dB at 1 kHz. Digital outputs carry S/PDIF PCM up to 24-bit/192 kHz, at 0.5 V p-p into 75 ohms on coaxial and -15 to -21 dBm on Toslink optical. Power consumption is 35 W, with less than 0.5 W in standby. It measures 444 x 152 x 483 mm (W x H x D, including front panel, knobs and cables) and weighs 12.7 kg.
Engineering and use context
Its transport uses a twin laser pickup, in which two laser elements with different wavelengths are focused through one lens assembly, together with an advanced digital servo. Conversion is by a 32-bit/192 kHz digital to analogue converter used in Stereo Balanced Mode. Power comes from a linear power supply with an R-Core power transformer and multiple regulators.
A DISC LAYER button selects between the SACD stereo, SACD multichannel and CD layers of a hybrid disc. Multichannel SACD material is downmixed to two channels at the analogue outputs.
On the control side there are POWER CONTROL IN and POWER CONTROL OUT connections for turn-on signals between McIntosh components, a DATA IN port for control data from a McIntosh control centre, and an IR IN socket for an external IR receiver. McIntosh supplies the HR086 remote control.
Pairing
The balanced outputs connect to a preamplifier or integrated amplifier with XLR inputs, and the RCA outputs to any line input. A McIntosh preamplifier or integrated amplifier connects through the Power Control and Data ports for switch-on and remote operation. An external DAC or A/V processor with coaxial or optical inputs connects to the digital outputs.
Alternatives
The MCD600 is a higher McIntosh SACD/CD player.