Hifiverse

CD-/SACD-Player und Transporte - Cary Audio DMC-600SE

Beschreibung, Bilder, technische Daten und Spezifikationen

Cary Audio DMC-600SE
Bildquelle - (c) Cary Audio

The DMC-600SE is a Digital Music Center from Cary Audio of the USA, a CD player that also works as a DAC with USB, Bluetooth and S/PDIF inputs. It combines a CD transport, AKM conversion and both solid-state and vacuum tube output stages in one full-width chassis. The matte black powder-coated chassis carries a silver or black aluminium faceplate.

Key specs that matter

The transport is a triple-beam laser, multi-speed CD transport for CD-DA, CD-R and CD-RW. Conversion uses one 4-channel AK4495EQ and two 2-channel AK4490EQ. Digital inputs are USB, Bluetooth, one AES/EBU, two coaxial and one Toslink, plus a master clock loop. USB accepts 44.1 - 384 kHz PCM at 16 - 32 bit and DSD64 and DSD128, while AES/EBU and S/PDIF accept 44.1 - 192 kHz at 16 - 24 bit. On CD the frequency range is 2 Hz - 22 kHz, dynamic range is 121 dB, SNR is 113 dB, channel separation is 106 dB and THD+N is 0.0004% (1 kHz). Output level is 2.0 V RMS at 0 dB volume and 3.0 V RMS at +8 dB, on RCA (220 ohms) and XLR (440 ohms). Power consumption is 86 W. Dimensions are 5.25 x 17.25 x 16.25 in (133 x 438 x 413 mm, H x W x D), and weight is 35 lb (15.9 kg).

Engineering and use context

An 8x oversampling digital filter is followed by up to seven selectable levels of PCM and DSD upsampling. Cary uses the AK4495EQ and the AK4490EQ pair for the balanced and single-ended outputs, with a 3rd-order Bessel analogue filter. Two 12AU7 tubes form the tube output stage, alongside the solid-state output stage.

Through USB the frequency range extends to 2 Hz - 100 kHz, with 123 dB dynamic range and 112 dB SNR. Its DSD system clock is 22.5792 MHz. Bluetooth is CSR v4.0 with an aptX low latency decoder at 44.1 kHz/16 bit. Coaxial and Toslink digital outputs pass 44.1 - 192 kHz at 16 - 24 bit.

Amplitude linearity on CD is 0.1 dB and phase linearity 3 degrees from 20 Hz to 20 kHz. For system control there are an IR remote, a 12 VDC trigger input and an RS232 interface for full remote configuration. Each unit is factory-configured for 110 - 120 or 220 - 240 VAC, 50 - 60 Hz.

Pairing

A preamplifier or integrated amplifier with a balanced or single-ended line input is required. A computer connects to the USB input, and a network streamer to the coaxial, Toslink or AES/EBU inputs. The coaxial and Toslink outputs connect to an external DAC.

Alternatives

Cary Audio has no other CD player in its current range.

Spezifikationen

  • Modellbezeichnung

    DMC-600SE

  • Transport

    Ja

  • Player

    Ja

  • SACD-Unterstützung

    k. A.

  • Wandlerchip

    AK4495EQ + AK4490EQ

  • Untere Grenzfrequenz +/- 3dB (CD) (Hz)

    2

  • Obere Grenzfrequenz +/- 3dB (CD) (Hz)

    22 000

  • Untere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    3

  • Ausgangspegel (unsymmetrisch) (V)

    3

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    440

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    220

  • Dynamikumfang (CD) (dB)

    N/A

  • Dynamikumfang (SACD) (dB)

    N/A

  • Signal-Rausch-Abstand (CD) (dB)

    113

  • Signal-Rausch-Abstand (SACD) (dB)

    N/A

  • Klirrfaktor + Rauschen (CD) (%)

    0.0004

  • Klirrfaktor + Rauschen (SACD) (%)

    N/A

  • Abmessungen (mm)

    133 x 438 x 413

  • Gewicht (kg)

    15.9

  • Offizieller Link