The FiiO DM15 R2R is a portable CD player built on the DM13 and equipped with FiiO's own fully differential, four-channel 24-bit R2R resistor-array DAC. It also works as a USB DAC, a Bluetooth transmitter and a CD ripper, and it runs from an internal battery or in a desktop mode from external power. Colours are black, white, red and silver.
Key specs that matter
Each of the four channels of the ladder DAC uses 48 precision thin-film resistors, 192 in total, with 0.1% accuracy and 30 ppm temperature drift. In CD mode FiiO specifies SNR ≥112 dB (A-weighted) and THD+N <0.030% (1 kHz/0 dB, 32 ohms) at the balanced output in desktop mode, with dynamic range ≥94 dB and frequency response 20 Hz - 20 kHz (<1.5 dB). Headphone power is about 1150 mW + 1150 mW into 32 ohms from the 4.4 mm balanced jack and 315 mW + 315 mW from the 3.5 mm jack. Line level reaches 6.5 Vrms balanced and 3.3 Vrms single-ended (1 kHz, 10 kohms). As a USB DAC it accepts PCM up to 384 kHz/32-bit and DSD256. Dimensions are about 144 x 137 x 25.5 mm and weight is about 471.5 g.
Engineering and use context
A custom laser pickup and a custom mechanism read the disc, and a self-rebounding steel ball design provides disc alignment. Its body is all-aluminium alloy, with tempered glass on the clear lid and on the front panel.
On the rear are a 4.4 mm balanced headphone output, a 3.5 mm headphone output, a 4.4 mm balanced line output and a 3.5 mm jack that works as line out, coaxial or optical output, plus a USB REC port and a POWER IN port. Through the USB REC port CDDA discs are saved as WAV files onto external storage.
Bluetooth 5.4 transmission is built on a Qualcomm QCC3095 chip with SBC, aptX, aptX HD, aptX LL and aptX Adaptive, from both CD and USB input. There are three bass modes and eight EQ presets. Power comes from a 4700 mAh, 3.85 V lithium cell, rated for about 7 hours in CD mode and about 11 hours in USB mode, and PD3.0 fast charging takes about 2 hours. Desktop Mode bypasses the battery for non-portable use. A remote control is included.
Pairing
The balanced 4.4 mm jacks require headphones or an amplifier with a 4.4 mm balanced input. An external DAC or a receiver with a coaxial or optical input connects to the digital output. Wireless headphones and speakers need aptX Adaptive, aptX HD, aptX or SBC support.
Alternatives
The FiiO DM13 is the portable CD player on which the DM15 R2R is based.